Suppr超能文献

用于清水混凝土的具有降黏和低收缩性能的聚羧酸系高效减水剂的合成与性能

Synthesis and Performance of Polycarboxylate Superplasticizer with Viscosity-Reducing and Low-Shrinkage Properties for Fair-Faced Concrete.

作者信息

Li Wei, Qian Chunxiang, Zheng Chunyang, Jiang Haidong, Yu Zhenxiao, Wu Zefan, Zhou Zhuang

机构信息

School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.

Jiangsu Arit New Materials Co., Ltd., Nanjing 211505, China.

出版信息

Materials (Basel). 2024 Jun 2;17(11):2685. doi: 10.3390/ma17112685.

Abstract

A low-shrinkage and viscosity-reducing polycarboxylate superplasticizer was synthesized with maleic anhydride (MAH), diethylene glycol monobutyl ether, and methoxypoly (ethylene glycol) methacrylate (MPEGMA). The surface tension, early shrinkage, cement paste performance, and application performance of concrete made with the synthesized water-reducing admixture were tested. A series of experiments were conducted to determine the optimal range of plastic viscosity coefficients for producing high-quality, fair-faced concrete with minimal surface defects. These experiments utilized both the synthesized water-reducing admixture alone and in combination with other water-reducing agents. The results showed that the synthesized water-reducing admixture had an ideal molecular structure, as confirmed by the GPC spectrum. When added to an aqueous solution, it reduced the surface tension from 72.47 mN/m to 30.56 mN/m. The 72 h shrinkage value of concrete was reduced by 20.6% compared with that of the conventional control group, effectively reducing shrinkage and adjusting the viscosity of the concrete mixture. Additionally, the influence of the plastic viscosity coefficient on the apparent voids in fair-faced concrete was investigated. This study revealed that when the plastic viscosity coefficient was between 5 and 10 Pa·s, the apparent void grade of the fair-faced concrete was simultaneously excellent and good. This water-reducing admixture helped prevent surface cracking and voids in fair-faced concrete, making it a suitable choice for producing high-quality fair-faced concrete surfaces.

摘要

以马来酸酐(MAH)、二乙二醇单丁醚和甲氧基聚(乙二醇)甲基丙烯酸酯(MPEGMA)合成了一种低收缩减粘聚羧酸高效减水剂。测试了用该合成减水剂配制的混凝土的表面张力、早期收缩、水泥净浆性能及应用性能。进行了一系列实验,以确定生产表面缺陷最少的高质量清水混凝土的最佳塑性粘度系数范围。这些实验单独使用合成减水剂以及将其与其他减水剂组合使用。结果表明,通过凝胶渗透色谱(GPC)谱证实,合成减水剂具有理想的分子结构。添加到水溶液中时,它将表面张力从72.47 mN/m降低到30.56 mN/m。与传统对照组相比,混凝土72 h收缩值降低了20.6%,有效减少了收缩并调节了混凝土混合物的粘度。此外,研究了塑性粘度系数对清水混凝土表观孔隙的影响。该研究表明,当塑性粘度系数在5至10 Pa·s之间时,清水混凝土的表观孔隙等级同时为优和好。这种减水剂有助于防止清水混凝土表面开裂和产生孔隙,使其成为生产高质量清水混凝土表面的合适选择。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/3819/11174076/713d6eff902a/materials-17-02685-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验