He Yuan, Xiang Ting, Ren Xuemei, Fang Shidong, Chen Changlun
Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, P.O. Box 1126, Hefei 230031, PR China; University of Science and Technology of China, Hefei 230026, PR China.
Institute of Energy, Hefei Comprehensive National Science Center (Anhui Energy Laboratory), Hefei 230023, PR China.
J Colloid Interface Sci. 2024 Nov 15;674:39-48. doi: 10.1016/j.jcis.2024.06.135. Epub 2024 Jun 20.
Although the recent emergence of decoupled water electrolysis prevents typical H/O mixing, the further development of decoupled water electrolysis has been confined by the lack of reliable redox mediator (RM) electrodes to support sustainable H production. As energy storage electrodes, layered double hydroxides (LDHs) possess inherently poor conductivity/stability, which can be improved by growing LDHs on graphene substrates in situ. The proper modification of the graphene surface structure can improve the electron transport and energy storage capacity of composite electrodes, while current methods are usually cumbersome and require high temperatures/chemical reagents. Therefore, in this study, dip coating was adopted to grow graphene oxide (GO) on nickel foam (NF). Then, the GO was reduced using nonthermal plasma (NTP) to reduced GO (rGO) in situ while simultaneously implementing N doping to obtain plasma-assisted N-doped rGO on NF (PNrGO/NF). The uniform conductive substrate ensured the subsequent growth of less-aggregated NiCo-LDH nanowires, which improved the conductivity and energy storage capacity (5.93 C/cm at 5 mA/cm) of the NiCo-LDH@PNrGO/NF. For the decoupled system, the composite RM electrode exhibited a high buffering capacity for 1300 s during the decoupled H/O evolution, and in the conventional coupled system, the necessary input voltage of 1.67 V was separated into two lower ones, 1.42/0.33 V for H/O evolutions, respectively. Simultaneously, the RM possessed outstanding redox reversibility and structural stability during long-term cycling. This work could offer a feasible strategy for using NTP to synthesize excellent RM electrodes for application to decoupled water electrolysis.
尽管最近出现的解耦水电解可防止典型的氢/氧混合,但解耦水电解的进一步发展受到缺乏可靠的氧化还原介质(RM)电极以支持可持续产氢的限制。作为储能电极,层状双氢氧化物(LDH)本身具有较差的导电性/稳定性,可通过在石墨烯基底上原位生长LDH来改善。对石墨烯表面结构进行适当修饰可提高复合电极的电子传输和储能能力,但目前的方法通常繁琐且需要高温/化学试剂。因此,在本研究中,采用浸涂法在泡沫镍(NF)上生长氧化石墨烯(GO)。然后,使用非热等离子体(NTP)将GO原位还原为还原氧化石墨烯(rGO),同时进行氮掺杂,以在NF上获得等离子体辅助氮掺杂的rGO(PNrGO/NF)。均匀的导电基底确保了后续生长较少聚集的NiCo-LDH纳米线,这提高了NiCo-LDH@PNrGO/NF的导电性和储能能力(在5 mA/cm时为5.93 C/cm)。对于解耦系统,复合RM电极在解耦氢/氧析出过程中表现出1300 s的高缓冲容量,在传统耦合系统中,所需的1.67 V输入电压被分为两个较低的电压,分别为氢/氧析出的1.42/0.33 V。同时,RM在长期循环过程中具有出色的氧化还原可逆性和结构稳定性。这项工作可为利用NTP合成优异的RM电极应用于解耦水电解提供一种可行的策略。