Department of Biomedical Engineering, University of Virginia, Charlottesville, VA 22903, USA.
Department of Chemical Engineering, University of Virginia, Charlottesville, VA 22903, USA.
J Mater Chem B. 2024 Jul 24;12(29):7122-7134. doi: 10.1039/d4tb00223g.
Micro- and nanoencapsulation of cells has been studied as a strategy to protect cells from environmental stress and promote survival during delivery. Hydrogels used in encapsulation can be modified to influence cell behaviors and direct assembly in their surroundings. Here, we report a system that conformally encapsulated stem cells using hyaluronic acid (HA). We successfully modified HA with lipid, thiol, and maleimide pendant groups to facilitate a hydrogel system in which HA was deposited onto cell plasma membranes and subsequently crosslinked through thiol-maleimide click chemistry. We demonstrated conformal encapsulation of both neural stem cells (NSCs) and mesenchymal stromal cells (MSCs), with viability of both cell types greater than 90% after encapsulation. Additional material could be added to the conformal hydrogel through alternating addition of thiol-modified and maleimide-modified HA in a layering process. After encapsulation, we tracked egress and viability of the cells over days and observed differential responses of cell types to conformal hydrogels both according to cell type and the amount of material deposited on the cell surfaces. Through the design of the conformal hydrogels, we showed that multicellular assembly could be created in suspension and that encapsulated cells could be immobilized on surfaces. In conjunction with photolithography, conformal hydrogels enabled rapid assembly of encapsulated cells on hydrogel substrates with resolution at the scale of 100 μm.
细胞的微囊化和纳米囊化已被研究作为一种策略,以保护细胞免受环境压力,并在输送过程中促进存活。用于封装的水凝胶可以进行修饰,以影响细胞行为并指导其周围的组装。在这里,我们报告了一种使用透明质酸(HA)对干细胞进行共形包封的系统。我们成功地用脂质、巯基和马来酰亚胺侧基对 HA 进行了修饰,以促进水凝胶系统的形成,其中 HA 沉积在细胞膜上,并通过巯基-马来酰亚胺点击化学反应进行交联。我们证明了神经干细胞(NSCs)和间充质基质细胞(MSCs)的共形包封,包封后两种细胞类型的存活率均大于 90%。通过在分层过程中交替添加巯基修饰的和马来酰亚胺修饰的 HA,可以向共形水凝胶中添加额外的材料。包封后,我们跟踪了细胞的移出和存活情况,并观察到细胞类型对共形水凝胶的不同反应,这既与细胞类型有关,也与沉积在细胞表面的材料数量有关。通过共形水凝胶的设计,我们表明可以在悬浮液中创建多细胞组装,并且可以将包封的细胞固定在表面上。与光光刻相结合,共形水凝胶使包封的细胞能够在水凝胶基底上快速组装,分辨率达到 100μm。