Vazquez-Gutierrez Isabel G, Reyes-López Miguel A, Ochoa Sara A, Cruz-Córdova Ariadnna, Hernández-Castro Rigoberto, Orduña-Díaz Abdú, Xicohtencatl-Cortes Juan
Centro de Investigación en Biotecnología Aplicada, Instituto Politécnico Nacional, Mexico 90700, Tlaxcala, México.
Centro de Biotecnología Genómica, Instituto Politécnico Nacional, Mexico 88710, Tamaulipas, México.
ACS Omega. 2024 Jun 12;9(25):27528-27536. doi: 10.1021/acsomega.4c02794. eCollection 2024 Jun 25.
Urinary tract infections (UTIs) are caused mainly by uropathogenic (UPEC), accounting for both uncomplicated (75%) and complicated (65%) UTIs. Detecting UPEC in a specific, rapid, and timely manner is essential for eradication, and optical biosensors may be useful tools for detecting UPEC. Recently, biosensors have been developed for the selective detection of antigen-antibody-specific interactions. In this study, a methodology based on the principle of an optical biosensor was developed to identify specific biomolecules, such as the PapG protein, which is located at the tip of P fimbriae and promotes the interaction of UPEC with the uroepithelium of the human kidney during a UTI. For biosensor construction, recombinant PapG protein was generated and polyclonal anti-PapG antibodies were obtained. The biosensor was fabricated in silicon supports because its surface and anchor biomolecules can be modified through its various properties. The fabrication process was carried out using self-assembled monolayers (SAMs) and an immobilized bioreceptor (anti-PapG) to detect the PapG protein. Each stage of biosensor development was evaluated by Fourier transform infrared (FTIR) spectroscopy. The infrared spectra showed bands corresponding to the C-H, C=O, and amide II bonds, revealing the presence of the PapG protein. Then, the spectra of the second derivative were obtained from 1600 to 1700 cm to specifically determine the interactions that occur in the secondary structures between the biological recognition element (anti-PapG antibodies) and the analyte (PapG protein) complex. The analyzed secondary structure showed β-sheets and β-turns during the detection of the PapG protein. Our data suggest that the PapG protein can be detected through an optical biosensor and that the biosensor exhibited high specificity for the detection of UPEC strains. Furthermore, these studies provide initial support for the development of more specific biosensors that can be applied in the future for the detection of clinical UPEC samples associated with ITUs.
尿路感染(UTIs)主要由尿路致病性大肠杆菌(UPEC)引起,在单纯性(75%)和复杂性(65%)尿路感染中均占主导。以特定、快速且及时的方式检测UPEC对于根除感染至关重要,而光学生物传感器可能是检测UPEC的有用工具。最近,已开发出用于选择性检测抗原 - 抗体特异性相互作用的生物传感器。在本研究中,基于光学生物传感器原理开发了一种方法,以识别特定生物分子,如位于P菌毛尖端的PapG蛋白,该蛋白在尿路感染期间促进UPEC与人肾尿路上皮的相互作用。为构建生物传感器,制备了重组PapG蛋白并获得了多克隆抗PapG抗体。生物传感器在硅载体上制造,因为其表面和锚定生物分子可通过其各种特性进行修饰。制造过程使用自组装单分子层(SAMs)和固定化生物受体(抗PapG)来检测PapG蛋白。生物传感器开发的每个阶段都通过傅里叶变换红外(FTIR)光谱进行评估。红外光谱显示出对应于C - H、C = O和酰胺II键的谱带,表明存在PapG蛋白。然后,从1600至1700 cm获得二阶导数光谱,以具体确定生物识别元件(抗PapG抗体)与分析物(PapG蛋白)复合物二级结构中发生的相互作用。分析的二级结构在检测PapG蛋白期间显示出β折叠和β转角。我们的数据表明,PapG蛋白可通过光学生物传感器检测到,并且该生物传感器对检测UPEC菌株具有高度特异性。此外,这些研究为开发更特异性的生物传感器提供了初步支持,这些生物传感器未来可用于检测与肾盂肾炎相关的临床UPEC样本。