Department of Radiology, The First Affiliated Hospital, Sun Yat-sen University, No. 58, Zhongshan Er Road, Guangzhou, Guangdong Province, 510080, People's Republic of China.
Department of Radiology, Foresea Life Insurance Guangzhou General Hospital, No. 703, Xincheng Avenue, Zengcheng District, Guangzhou, Guangdong, 511300, China.
BMC Med Imaging. 2024 Jul 1;24(1):162. doi: 10.1186/s12880-024-01343-z.
The image quality of computed tomography angiography (CTA) images following endovascular aneurysm repair (EVAR) is not satisfactory, since artifacts resulting from metallic implants obstruct the clear depiction of stent and isolation lumens, and also adjacent soft tissues. However, current techniques to reduce these artifacts still need further advancements due to higher radiation doses, longer processing times and so on. Thus, the aim of this study is to assess the impact of utilizing Single-Energy Metal Artifact Reduction (SEMAR) alongside a novel deep learning image reconstruction technique, known as the Advanced Intelligent Clear-IQ Engine (AiCE), on image quality of CTA follow-ups conducted after EVAR.
This retrospective study included 47 patients (mean age ± standard deviation: 68.6 ± 7.8 years; 37 males) who underwent CTA examinations following EVAR. Images were reconstructed using four different methods: hybrid iterative reconstruction (HIR), AiCE, the combination of HIR and SEMAR (HIR + SEMAR), and the combination of AiCE and SEMAR (AiCE + SEMAR). Two radiologists, blinded to the reconstruction techniques, independently evaluated the images. Quantitative assessments included measurements of image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), the longest length of artifacts (AL), and artifact index (AI). These parameters were subsequently compared across different reconstruction methods.
The subjective results indicated that AiCE + SEMAR performed the best in terms of image quality. The mean image noise intensity was significantly lower in the AiCE + SEMAR group (25.35 ± 6.51 HU) than in the HIR (47.77 ± 8.76 HU), AiCE (42.93 ± 10.61 HU), and HIR + SEMAR (30.34 ± 4.87 HU) groups (p < 0.001). Additionally, AiCE + SEMAR exhibited the highest SNRs and CNRs, as well as the lowest AIs and ALs. Importantly, endoleaks and thrombi were most clearly visualized using AiCE + SEMAR.
In comparison to other reconstruction methods, the combination of AiCE + SEMAR demonstrates superior image quality, thereby enhancing the detection capabilities and diagnostic confidence of potential complications such as early minor endleaks and thrombi following EVAR. This improvement in image quality could lead to more accurate diagnoses and better patient outcomes.
血管内动脉瘤修复术(EVAR)后,计算机断层血管造影(CTA)图像的质量并不理想,因为金属植入物产生的伪影会妨碍对支架和隔离腔的清晰显示,并且还会妨碍相邻的软组织。然而,由于辐射剂量更高、处理时间更长等原因,目前减少这些伪影的技术仍需要进一步发展。因此,本研究旨在评估在 EVAR 后进行 CTA 随访时,使用单能量金属伪影减少(SEMAR)和一种新的深度学习图像重建技术,即高级智能清晰 IQ 引擎(AiCE)对图像质量的影响。
这项回顾性研究纳入了 47 名患者(平均年龄 ± 标准差:68.6 ± 7.8 岁;男性 37 名),这些患者在 EVAR 后进行了 CTA 检查。图像使用四种不同的方法进行重建:混合迭代重建(HIR)、AiCE、HIR 和 SEMAR 的组合(HIR + SEMAR)以及 AiCE 和 SEMAR 的组合(AiCE + SEMAR)。两名放射科医生对重建技术不了解,他们独立评估了图像。定量评估包括测量图像噪声、信噪比(SNR)、对比噪声比(CNR)、伪影最长长度(AL)和伪影指数(AI)。随后比较了不同重建方法之间的这些参数。
主观结果表明,在图像质量方面,AiCE + SEMAR 表现最佳。AiCE + SEMAR 组的平均图像噪声强度明显低于 HIR(47.77 ± 8.76 HU)、AiCE(42.93 ± 10.61 HU)和 HIR + SEMAR(30.34 ± 4.87 HU)组(p < 0.001)。此外,AiCE + SEMAR 具有最高的 SNR 和 CNR,以及最低的 AI 和 AL。重要的是,使用 AiCE + SEMAR 可以最清楚地显示内漏和血栓。
与其他重建方法相比,AiCE + SEMAR 的组合具有更高的图像质量,从而提高了 EVAR 后早期小内漏和血栓等潜在并发症的检测能力和诊断信心。这种图像质量的提高可以带来更准确的诊断和更好的患者结果。