Wang Zhipeng, Xu Qiaowei, Zhou Yanmin, Li Gang, He Bin
State Key Laboratory of Intelligent Autonomous Systems, Shanghai, 201109, China.
Frontiers Science Center for Intelligent Autonomous Systems, Shanghai, 201109, China.
Sci Rep. 2024 Jul 4;14(1):15411. doi: 10.1038/s41598-024-66566-0.
Dielectric Elastomer Minimum Energy Structures (DEMES) have the ability of actively adjusting their shape to accommodate complex scenarios, understanding the actuation mechanism of DEMES is essential for their effective design and control, which has rendered them a focus of research in the field of soft robotics. The actuation ability of DEMES is usually influenced by external conditions, among which the electromechanical properties of DE materials are highly sensitive to temperature changes, and the pre-stretch ratio of DE materials has a significant impact on the dynamic performance of DEMES. Therefore, it is necessary to study the effects of temperature and pre-stretch ratio on the nonlinear dynamic behavior of DEMES. In this paper, in response to the lack of research on the influence of DE pre-stretch ratio on the actuation characteristics of DEMES, this paper proposes a systematic modeling and analysis framework that comprehensively considers pre-stretch factors, temperature factors, and viscoelastic factors, and establishes the motion control equation of DEMES affected by the coupling effect of DE pre-stretch ratio and temperature. The proposed analytical framework is used to analyze the evolution of the electromechanical response of DEMES under voltage excitation under the coupling of DE pre-stretch ratio and temperature. The results indicate that the bending angle, inelastic deformation, resonant frequency, and dynamic stability of DEMES can be jointly adjusted by the DE pre-stretch ratio and ambient temperature. A low pre-stretch ratio of DE can lead to dynamic instability of DEMES, while appropriate temperature conditions and higher pre-stretch ratios can significantly improve the actuation ability of DEMES. This can provide theoretical guidance for the design and deformation control of DEMES.
介电弹性体最小能量结构(DEMES)具有主动调整自身形状以适应复杂场景的能力,了解DEMES的驱动机制对于其有效设计和控制至关重要,这使其成为软机器人领域的研究热点。DEMES的驱动能力通常受外部条件影响,其中DE材料的机电性能对温度变化高度敏感,且DE材料的预拉伸比对DEMES的动态性能有显著影响。因此,有必要研究温度和预拉伸比对DEMES非线性动态行为的影响。针对目前缺乏对DE预拉伸比对DEMES驱动特性影响研究的现状,本文提出了一个系统的建模与分析框架,该框架综合考虑了预拉伸因素、温度因素和粘弹性因素,并建立了受DE预拉伸比和温度耦合效应影响的DEMES运动控制方程。利用所提出的分析框架,分析了在DE预拉伸比和温度耦合作用下,电压激励下DEMES机电响应的演变。结果表明,DEMES的弯曲角度、非弹性变形、共振频率和动态稳定性可通过DE预拉伸比和环境温度共同调节。较低的DE预拉伸比会导致DEMES动态不稳定,而适当的温度条件和较高的预拉伸比可显著提高DEMES的驱动能力。这可为DEMES的设计和变形控制提供理论指导。