Pradhan Anusha, Nishimura Shoma, Kondo Yasuyuki, Kaneko Tomoaki, Katayama Yu, Sodeyama Keitaro, Yamada Yuki
SANKEN, Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan.
Department of Computational Science and Technology, Research Organization for Information Science and Technology (RIST), 1-18-16, Hamamatsucho, Minato-ku, Tokyo 105-0013, Japan.
Faraday Discuss. 2024 Oct 25;253(0):314-328. doi: 10.1039/d4fd00038b.
Lithium (Li) metal negative electrodes have attracted wide attention for high-energy-density batteries. However, their low coulombic efficiency (CE) due to parasitic electrolyte reduction has been an alarming concern. Concentrated electrolytes are one of the promising concepts that can stabilize the Li metal/electrolyte interface, thus increasing the CE; however, its mechanism has remained controversial. In this work, we used a combination of LiN(SOF) (LiFSI) and weakly solvating 1,2-diethoxyethane (DEE) as a model electrolyte to study how its liquid structure changes upon increasing salt concentration and how it is linked to the Li plating/stripping CE. Based on previous works, we focused on the Li electrode potential ( with reference to the redox potential of ferrocene) and solid-electrolyte-interphase (SEI) formation. Although shows a different trend with DEE compared to conventional 1,2-dimethoxyethane (DME), which is accounted for by different ion-pair states of Li and FSI, the -CE plots overlap for both electrolytes, suggesting that is one of the dominant factors of the CE. On the other hand, the extensive ion pairing results in the upward shift of the FSI reduction potential, as demonstrated both experimentally and theoretically, which promotes the FSI-derived inorganic SEI. Both and SEI contribute to increasing the Li plating/stripping CE.
锂(Li)金属负极因其在高能量密度电池方面的应用而备受关注。然而,由于寄生性电解液还原导致的低库仑效率(CE)一直是一个令人担忧的问题。浓电解液是有望稳定锂金属/电解液界面从而提高CE的概念之一;然而,其作用机制仍存在争议。在这项工作中,我们使用双(氟磺酰)亚胺锂(LiFSI)和弱溶剂化的1,2 - 二乙氧基乙烷(DEE)的组合作为模型电解液,研究其液体结构如何随盐浓度增加而变化,以及它与锂电镀/剥离CE之间的联系。基于之前的工作,我们重点关注锂电极电位(相对于二茂铁的氧化还原电位)和固体电解质界面(SEI)的形成。尽管与传统的1,2 - 二甲氧基乙烷(DME)相比,DEE表现出不同的趋势,这是由Li和FSI不同的离子对状态所导致的,但两种电解液的η - CE曲线重叠,这表明η是CE的主要影响因素之一。另一方面,大量的离子对导致FSI还原电位上移,这在实验和理论上都得到了证实,进而促进了源自FSI的无机SEI的形成。η和SEI都有助于提高锂电镀/剥离CE。