Department of Biomedical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA; Boston Scientific, Marlborough, MA, USA.
Department of Biomedical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA.
Colloids Surf B Biointerfaces. 2024 Oct;242:114069. doi: 10.1016/j.colsurfb.2024.114069. Epub 2024 Jun 29.
Research of the nontraditional polysaccharide gellan gum (GG) is a growing space for the development of novel drug delivery systems due to its tunable physic-mechanical properties, biocompatibility, and stability in a wide range of environments. Unfortunately, high temperature crosslinking is often required, representing a limiting factor for the incorporation of thermosensitive therapeutic agents. Here, we demonstrated that GG can be crosslinked at a low temperature (38 °C) using a simple fabrication process that utilizes trilysine as an alternative to traditional mono- or divalent ion crosslinkers. While elevated temperature mixing is still required to form a clear GG solution, crosslinking of 0.5 - 1 % GG (w/v) in the presence of trilysine (0.03 % - 0.05 % w/v) was achieved at 38 °C resulting in hydrogels with suitable working formulations to facilitate syringe loading. Low injection forces (< 20 N), and biocompatibility was evaluated with normal human dermal fibroblast (cell viability > 90 %). Frequency sweep showed a transition from purely liquid-like behavior to gel-like behavior with increased trilysine concentration. A temperature dependent behavior was lost with higher trilysine concentrations, indicating stable hydrogel formation. NMR results suggest that trilysine participates in gelation via both ionic interactions between the primary amines of trilysine and the carboxylate residues of glucuronic acid and hydrogen bonding. Released studies showed that GG hydrogels can entrap and provide sustained release of IgG in relation to the crosslinker, and antibody concentration used, with a burst release within the first 24 h (∼80 % cumulative released) followed by a sustained released for up to 5 days. Overall, findings demonstrate a promising nontoxic injectable hydrogel that requires lower crosslinking temperatures, is simple to manufacture and serves as a carrier of thermosensitive therapeutic agents.
研究非传统多糖结冷胶(GG)是开发新型药物输送系统的一个不断增长的领域,因为它具有可调节的物理机械性能、生物相容性和在广泛环境中的稳定性。不幸的是,通常需要高温交联,这是纳入热敏治疗剂的一个限制因素。在这里,我们证明 GG 可以在低温(38°C)下交联,使用一种简单的制造工艺,该工艺利用三赖氨酸作为传统单或二价离子交联剂的替代品。虽然仍然需要升高温度混合来形成澄清的 GG 溶液,但在 38°C 下,在三赖氨酸(0.03%-0.05%w/v)存在下,0.5-1%GG(w/v)的交联可以实现,从而得到适合注射器加载的水凝胶。低注射力(<20N)和生物相容性用正常人类皮肤成纤维细胞(细胞活力>90%)进行了评估。频率扫描显示,随着三赖氨酸浓度的增加,从纯液态行为向凝胶态行为转变。随着三赖氨酸浓度的增加,失去了温度依赖性行为,表明稳定的水凝胶形成。NMR 结果表明,三赖氨酸通过三赖氨酸的伯胺与葡萄糖醛酸的羧基残基之间的离子相互作用和氢键参与凝胶化。释放研究表明,GG 水凝胶可以包封并提供与交联剂和使用的抗体浓度相关的 IgG 的持续释放,在前 24 小时内(约 80%累积释放)有一个突释释放,随后持续释放长达 5 天。总的来说,研究结果表明,这种非毒性可注射水凝胶具有很大的应用前景,它需要较低的交联温度,制造简单,并且可以作为热敏治疗剂的载体。