Suppr超能文献

基于机箱的光纤耦合光学探头设计,用于可重复的定量漫射光学光谱测量。

Chassis-based fiber-coupled optical probe design for reproducible quantitative diffuse optical spectroscopy measurements.

机构信息

Division of Neurology, Department of Pediatrics, Children's Hospital of Philadelphia, Philadelphia, PA, United States of America.

School of Biomedical Engineering, Science and Health Systems, Drexel University, Philadelphia, Pennsylvania, United States of America.

出版信息

PLoS One. 2024 Jul 25;19(7):e0305254. doi: 10.1371/journal.pone.0305254. eCollection 2024.

Abstract

Advanced optical neuromonitoring of cerebral hemodynamics with hybrid diffuse optical spectroscopy (DOS) and diffuse correlation spectroscopy (DCS) methods holds promise for non-invasive characterization of brain health in critically ill patients. However, the methods' fiber-coupled patient interfaces (probes) are challenging to apply in emergent clinical scenarios that require rapid and reproducible attachment to the head. To address this challenge, we developed a novel chassis-based optical probe design for DOS/DCS measurements and validated its measurement accuracy and reproducibility against conventional, manually held measurements of cerebral hemodynamics in pediatric swine (n = 20). The chassis-based probe design comprises a detachable fiber housing which snaps into a 3D-printed, circumferential chassis piece that is secured to the skin. To validate its reproducibility, eight measurement repetitions of cerebral tissue blood flow index (BFI), oxygen saturation (StO2), and oxy-, deoxy- and total hemoglobin concentration were acquired at the same demarcated measurement location for each pig. The probe was detached after each measurement. Of the eight measurements, four were acquired by placing the probe into a secured chassis, and four were visually aligned and manually held. We compared the absolute value and intra-subject coefficient of variation (CV) of chassis versus manual measurements. No significant differences were observed in either absolute value or CV between chassis and manual measurements (p > 0.05). However, the CV for BFI (mean ± SD: manual, 19.5% ± 9.6; chassis, 19.0% ± 10.8) was significantly higher than StO2 (manual, 5.8% ± 6.7; chassis, 6.6% ± 7.1) regardless of measurement methodology (p<0.001). The chassis-based DOS/DCS probe design facilitated rapid probe attachment/re-attachment and demonstrated comparable accuracy and reproducibility to conventional, manual alignment. In the future, this design may be adapted for clinical applications to allow for non-invasive monitoring of cerebral health during pediatric critical care.

摘要

采用混合漫射光学光谱(DOS)和漫射相关光谱(DCS)方法对脑血流动力学进行高级光学神经监测,有望实现对危重症患者脑健康的非侵入性特征描述。然而,这些方法的光纤耦合患者接口(探头)在需要快速且可重复地连接到头骨的紧急临床情况下难以应用。为了解决这一挑战,我们开发了一种新的基于机箱的 DOS/DCS 测量探头设计,并通过对 20 头儿科猪的脑血流动力学进行常规、手动持有的测量来验证其测量准确性和可重复性。基于机箱的探头设计包括一个可拆卸的光纤外壳,该外壳可卡扣在一个 3D 打印的、环绕的机箱件上,该机箱件固定在皮肤上。为了验证其可重复性,在每头猪的相同标记测量位置上,获取了 8 次脑组织血流指数(BFI)、氧饱和度(StO2)、氧合、脱氧和总血红蛋白浓度的测量重复值。每次测量后,探头都会被拆卸。在这 8 次测量中,有 4 次是将探头放入固定的机箱中进行测量,有 4 次是通过视觉对准并手动保持进行测量。我们比较了机箱与手动测量的绝对值和个体内变异系数(CV)。在绝对值或 CV 方面,机箱与手动测量均无显著差异(p>0.05)。然而,BFI 的 CV(平均值±标准差:手动,19.5%±9.6;机箱,19.0%±10.8)明显高于 StO2(手动,5.8%±6.7;机箱,6.6%±7.1),无论测量方法如何(p<0.001)。基于机箱的 DOS/DCS 探头设计促进了探头的快速连接/重新连接,并表现出与传统手动对准相当的准确性和可重复性。在未来,这种设计可能会被应用于临床,以允许在儿科重症监护期间对脑健康进行非侵入性监测。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/2fe0/11271963/b027255da360/pone.0305254.g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验