Suppr超能文献

0.12%葡萄糖酸氯己定浸泡后选定的不可吸收和可吸收缝合材料拉伸强度比较的研究

Study of Tensile Strength Comparison of Selected Nonabsorbable and Absorbable Suture Materials after Immersion in 0.12% Chlorhexidine Gluconate.

作者信息

Ching Ezra Emmanuel B, Chaiyasamut Teeranut, Vorakulpipat Chakorn

机构信息

Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mahidol University, Bangkok, Thailand.

出版信息

J Int Soc Prev Community Dent. 2024 Jun 27;14(3):201-210. doi: 10.4103/jispcd.jispcd_162_23. eCollection 2024 May-Jun.

Abstract

AIM

To compare the tensile strength (TS) of absorbable and nonabsorbable suture materials after immersion in 0.12% chlorhexidine gluconate.

MATERIALS AND METHODS

Six 4-0-gauge suture materials were used, namely silk (S), polypropylene (PP), polyamide 6 (PA6), polyglactin 910 (PG910), poliglecaprone 25 (PL25), and polydioxanone (PDX). A total of 540 suture materials were divided equally (90) into six groups and tested. These materials were divided into a nonimmersed condition (10) and two thermostatically controlled immersion media (40 each), using artificial saliva for the control group (CG) and 0.12% chlorhexidine gluconate for the test group (TG). The specimens were tied to prefabricated rubber rods before immersion and removed at the testing timepoint. By using a universal testing machine (Instron 5566) with hooks attached, a hook-mounted specimen TS testing was performed on days 0, 1, 3, 7, and 14 at a 10 mm/min crosshead speed until the material was stretched to failure, and the maximum TS was recorded in Newtons (N). The continuous variables were taken as the mean and standard deviation across the six study groups to assess the significance at = 0.05. A two-factor analysis of variance (ANOVA) was performed to assess the TSs over time in different media. A Bonferroni correction was performed when the data were statistically significant according to a two-factor ANOVA. Intragroup statistical comparisons were performed by repeated ANOVA for each study group. All data were analyzed using SPSS 26.

RESULTS

The suture material TS analysis showed that nonabsorbable suture materials maintained their TS throughout the study; silk exhibited different behaviors, decreasing in TS from baseline to day 1 and maintaining its TS until day 14. All absorbable suture materials decreased in TSs by day 14. The silk and PG910 samples in the TG performed significantly better than those in the CG.

CONCLUSIONS

Prescribing 0.12% chlorhexidine gluconate as a postsurgical mouth rinse is safest when silk and PG910 are the optimal suture materials.

摘要

目的

比较可吸收和不可吸收缝合材料在浸入0.12%葡萄糖酸氯己定后的拉伸强度(TS)。

材料与方法

使用六种4-0规格的缝合材料,即丝线(S)、聚丙烯(PP)、聚酰胺6(PA6)、聚乙醇酸910(PG910)、聚乙交酯丙交酯25(PL25)和聚二氧六环酮(PDX)。总共540根缝合材料平均分成六组(每组90根)进行测试。这些材料分为未浸入状态(10根)和两种恒温控制的浸入介质(每种40根),对照组(CG)使用人工唾液,试验组(TG)使用0.12%葡萄糖酸氯己定。标本在浸入前系在预制橡胶棒上,并在测试时间点取出。使用配有挂钩的万能试验机(Instron 5566),在第0、1、3、7和14天以10毫米/分钟的十字头速度对挂钩安装的标本进行TS测试,直至材料拉伸至断裂,并以牛顿(N)记录最大TS。连续变量以六个研究组的平均值和标准差表示,以评估在α = 0.05时的显著性。进行双因素方差分析(ANOVA)以评估不同介质中随时间变化的TS。当数据根据双因素ANOVA具有统计学显著性时,进行Bonferroni校正。每个研究组通过重复ANOVA进行组内统计比较。所有数据使用SPSS 26进行分析。

结果

缝合材料TS分析表明,不可吸收缝合材料在整个研究过程中保持其TS;丝线表现出不同的行为,TS从基线到第1天下降,并在第14天之前保持其TS。所有可吸收缝合材料到第14天时TS均下降。TG中的丝线和PG910样本的表现明显优于CG中的样本。

结论

当丝线和PG910是最佳缝合材料时,开0.12%葡萄糖酸氯己定作为术后口腔含漱液是最安全的。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/9634/11268532/d8dc33dfb2b9/JISPCD-14-201-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验