Saha Dipankar, Bhardwaj Ayush, Wang Jiacheng, Pande Varun, Hengstebeck Robert, Bai Peng, Watkins James J
Conte Center for Polymer Research, Department of Polymer Science and Engineering, University of Massachusetts Amherst, Amherst, Massachusetts 01003, United States.
Department of Chemical Engineering, University of Massachusetts Amherst, Amherst, Massachusetts 01003, United States.
ACS Appl Mater Interfaces. 2024 Aug 14;16(32):42254-42269. doi: 10.1021/acsami.4c08869. Epub 2024 Aug 2.
The development of low-cost and active electrocatalysts signifies an important effort toward accelerating economical water electrolysis and overcoming the sluggish hydrogen or oxygen evolution reaction (HER or OER) kinetics. Herein, we report a scalable and rapid synthesis of inexpensive Ni and MoS electrocatalysts on N-doped graphene/carbon cloth substrate to address these challenges. Mesoporous N-doped graphene is synthesized by using electrochemical polymerization of polyaniline (PANI), followed by a rapid one-step photothermal pyrolysis process. The N-doped graphene/carbon cloth substrate improves the interconnection between the electrocatalyst and substrate. Consequently, Ni species deposited on an N-doped graphene OER electrocatalyst shows a low Tafel slope value of 35 mV/decade at an overpotential of 130 mV at 10 mA/cm current density in 1 M KOH electrolytes. In addition, Ni-doped MoS on N-doped graphene HER electrocatalyst shows Tafel slopes of 37 and 42 mV/decade and overpotentials of 159 and 175 mV, respectively, in acidic and alkaline electrolytes at 10 mA/cm current density. Both these values are lower than recently reported nonplatinum-group-metal-based OER and HER electrocatalysts. These excellent electrochemical performances are due to the high electrochemical surface area, a porous structure that improves the charge transfer between electrode and electrolytes, and the synergistic effect between the substrate and electrocatalyst. Raman spectroscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations demonstrate that the Ni hydroxide species and Ni-doped MoS edge sites serve as active sites for OER and HER, respectively. Finally, we also evaluate the performance of the HER electrocatalyst in commercial alkaline electrolyzers.
开发低成本且活性高的电催化剂是加速经济可行的水电解以及克服缓慢的析氢或析氧反应(HER或OER)动力学的一项重要工作。在此,我们报告了一种在氮掺杂石墨烯/碳布基底上可扩展且快速合成廉价镍和硫化钼电催化剂的方法,以应对这些挑战。介孔氮掺杂石墨烯通过聚苯胺(PANI)的电化学聚合,随后进行快速一步光热热解过程来合成。氮掺杂石墨烯/碳布基底改善了电催化剂与基底之间的互连。因此,沉积在氮掺杂石墨烯OER电催化剂上的镍物种在1 M KOH电解质中,于10 mA/cm²电流密度、130 mV过电位下显示出35 mV/dec的低塔菲尔斜率值。此外,氮掺杂石墨烯HER电催化剂上的镍掺杂硫化钼在酸性和碱性电解质中,于10 mA/cm²电流密度下分别显示出37和42 mV/dec的塔菲尔斜率以及159和175 mV的过电位。这两个值均低于最近报道的非铂族金属基OER和HER电催化剂。这些优异的电化学性能归因于高电化学表面积、改善电极与电解质之间电荷转移的多孔结构以及基底与电催化剂之间的协同效应。拉曼光谱、X射线光电子能谱和密度泛函理论(DFT)计算表明,氢氧化镍物种和镍掺杂硫化钼边缘位点分别作为OER和HER的活性位点。最后,我们还评估了HER电催化剂在商业碱性电解槽中的性能。