Purge and trap method for determination of ethylene dibromide in whole grains, milled grain products, intermediate grain-based foods, and animal feeds.

An improved method has been developed for the determination of ethylene dibromide (EDB; 1,2-dibromoethane) in whole grains, milled grain products, intermediate grain-based foods, and animal feeds. Samples are mixed with water and sparged with nitrogen for 1 h with stirring in a water bath at 100 degrees C. The EDB collected on the adsorbent Tenax TA is eluted with hexane and determined by gas chromatography (GC) with electron capture detection (ECD) and confirmed with Hall electrolytic conductivity detection (HECD) using a second GC column. The highest levels of EDB were also confirmed by full scan GC/mass spectrometry (GC/MS). A total of 24 whole grains, milled grain products, intermediate grain-based foods, and animal feeds analyzed by using this method contained EDB levels up to 840 ppb (wheat). Recoveries from fortified samples ranged from 90 to 105%. Values from this method were compared with those obtained from the acetone soak method; for all 24 samples, this purge and trap method gave equivalent or superior recoveries and detected levels of EDB. Chromatograms for this purge and trap method were clean, enabling a quantitation level of 0.5 ppb to be achieved.