Assessment of Ti, Ir, Ta and Ru influence on mixed metal oxide electrodes for photoelectrochemical generation of persulfate: Impact on sulfamethoxazole degradation.

The presence of persulfate (SO) in decontamination processes favors the oxidation of organic pollutants due to its strong oxidation power. In this research we study the photoelectrochemical generation of persulfate using five mixed metal oxides electrodes (MMO) with different compositions and its effect on the degradation of sulfamethoxazole antibiotic (SMX) by photoelectrocatalysis (PEC) and electro-oxidation (EO). By PEC, all anodes generated a higher concentration of SO than those not exposed to light. The high SOconcentration obtained by PEC was 0.150 mM using MMO in a solution with NaSO 100 mM applying a current density of 2 mA/cm. On the other hand, the maximum concentration obtained was 0.250 mM at 30 min of electrolysis for MMO using NaSO 50 mM and applying current density of 5 mA/cm. SOproduction by EO was between 0.005 and 0.089 mM. It is observed that MMO based in TaO showed the best SO production. The effect of SO electro-generation (using the anode with the highest and the anode with the lowest SO production) on the degradation of sulfamethoxazole by PEC and EO was studied using the experimental conditions with the best production of this oxidant. MMO and MMO were used as anodes, and it was observed that by PEC, 100% of SMX was degraded after 30 min of electrolysis using MMO and 60 min using MMO By EO, the degradation of SMX was partial, demonstrating that the electrophotocatalytic effect favors the generation of SO, enhancing the degradation of SMX at short electrolysis times.