Suppr超能文献

多能量 X 射线与质子 CT 成像及塑料和体模相对阻止本领估算的直接比较。

A direct comparison of multi-energy x-ray and proton CT for imaging and relative stopping power estimation of plastic andphantoms.

机构信息

Physics Department, University of Trento, Trento, TN, Italy.

Trento Institute for Fundamental Physics and Applications (TIFPA), Italian National Institute of Nuclear Physics (INFN), Trento, TN, Italy.

出版信息

Phys Med Biol. 2024 Aug 30;69(17). doi: 10.1088/1361-6560/ad70ef.

Abstract

Proton therapy administers a highly conformal dose to the tumour region, necessitating accurate prediction of the patient's 3D map of proton relative stopping power (RSP) compared to water. This remains challenging due to inaccuracies inherent in single-energy computed tomography (SECT) calibration. Recent advancements in spectral x-ray CT (xCT) and proton CT (pCT) have shown improved RSP estimation compared to traditional SECT methods. This study aims to provide the first comparison of the imaging and RSP estimation performance among dual-energy CT (DECT) and photon-counting CT (PCCT) scanners, and a pCT system prototype.Two phantoms were scanned with the three systems for their performance characterisation: a plastic phantom, filled with water and containing four plastic inserts and a wood insert, and a heterogeneous biological phantom, containing a formalin-stabilised bovine specimen. RSP maps were generated by converting CT numbers to RSP using a calibration based on low- and high-energy xCT images, while pCT utilised a distance-driven filtered back projection algorithm for RSP reconstruction. Spatial resolution, noise, and RSP accuracy were compared across the resulting images.All three systems exhibited similar spatial resolution of around 0.54 lp/mm for the plastic phantom. The PCCT images were less noisy than the DECT images at the same dose level. The lowest mean absolute percentage error (MAPE) of RSP,(0.28±0.07)%, was obtained with the pCT system, compared to MAPE values of(0.51±0.08)%and(0.80±0.08)%for the DECT- and PCCT-based methods, respectively. For the biological phantom, the xCT-based methods resulted in higher RSP values in most of the voxels compared to pCT.The pCT system yielded the most accurate estimation of RSP values for the plastic materials, and was thus used to benchmark the xCT calibration performance on the biological phantom. This study underlined the potential benefits and constraints of utilising such a novelphantom for inter-centre surveys in future.

摘要

质子治疗对肿瘤区域进行高度适形剂量照射,因此需要准确预测患者相对于水的质子相对阻止本领(RSP)的三维图谱。由于单能计算机断层扫描(SECT)校准中的固有误差,这仍然具有挑战性。最近,光谱 X 射线 CT(xCT)和质子 CT(pCT)的进展表明,与传统的 SECT 方法相比,RSP 估计得到了改善。本研究旨在首次比较双能 CT(DECT)和光子计数 CT(PCCT)扫描仪以及质子 CT 系统原型的成像和 RSP 估计性能。对三个系统进行了两个体模扫描,以对其性能进行特征描述:一个装满水的塑料体模,其中包含四个塑料插件和一个木制插件,以及一个包含福尔马林稳定牛标本的异质生物体模。通过将 CT 数转换为使用基于低能和高能 xCT 图像的校准的 RSP 来生成 RSP 图,而 pCT 则使用距离驱动的滤波反投影算法进行 RSP 重建。比较了生成图像的空间分辨率、噪声和 RSP 准确性。对于塑料体模,三个系统都表现出相似的空间分辨率,约为 0.54 lp/mm。在相同剂量水平下,PCCT 图像的噪声小于 DECT 图像。与基于 DECT 和 PCCT 的方法的平均绝对百分比误差(MAPE)值(分别为 0.51±0.08)%和(0.80±0.08)%相比,pCT 系统获得的最低 RSP (0.28±0.07)%。对于生物体模,与 pCT 相比,基于 xCT 的方法在大多数体素中导致更高的 RSP 值。对于塑料材料,pCT 系统产生了最准确的 RSP 值估计,因此用于在生物体模上基准测试 xCT 校准性能。这项研究强调了利用这种新型体模进行未来中心间调查的潜在好处和限制。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验