Investigation of mechanical and physico-chemical properties of new natural fiber extracted from plant for reinforcement of lightweight bio-composites.

In this investigation, novel cellulose fibers were acquired from the plant to serve as a reinforcement source in composite materials. The morphological characteristics were studied using Scanning Electron Microscopy (SEM). The surface chemistry, crystallinity, and functional groups of fibers were analyzed using X-ray Diffraction (XRD), Energy Dispersive X-ray (EDX) spectroscopy, and Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR), which assess the crystal structure, elemental composition, and surface functional groups, respectively. The thermal behavior of fibers were assessed through Thermogravimetric Analysis (TGA). Anatomical techniques demonstrated the abundant presence of fibroblasts in the fibers. The presence of lignocellulosic fiber (lignin, cellulose and hemicellulose) was confirmed through ATR-FTIR analysis. The analysis of physical properties unveiled a fiber density of 1.065 ± 0.025 g/cm³ and a diameter of 145.58 ± 7.89 μm. The crystalline size of fibers reached 2.23 nm, with a crystallinity index of 40.12 %, and an activation energy of 93.78 kJ/mol, TGA research revealed that fibers are thermally stable up to 260.24 °C. Additionally, the fibers experienced maximum degradation at 321.23 °C. Weibull statistical analysis was performed using parameters 2 and 3 to calculate the observed dispersion in the experimental tensile results after analyzing the mechanical properties of the fibers possessing a tensile strength of 417.50 ± 7.08 MPa, Young's modulus of 17.46 ± 1.55 GPa, stress at failure of 1.17 ± 0.02 % and interfacial shear strength of 6.99 ± 1.10 MPa. The results were additionally compared to how they were stated in the relevant sources. fibers can be considered a viable choice for reinforcing lightweight bio-composites.