Phase change material composites based on 3D lignin-derived porous carbon prepared by in-situ activation for efficient solar-driven energy conversion and storage.

Utilization of three-dimensional biomass-derived porous carbons can effectively address issues of easy leakage, low thermal conductivity, and weak photothermal conversion of phase change materials (PCMs). This enables the production of high-performance composites for solar-induced energy collection, conversion, and storage. In this study, hierarchical lignin-derived porous carbon (HLPC), microporous lignin-derived porous carbon (MILPC) and mesoporous lignin-derived porous carbon (MELPC) were prepared through high-temperature in-situ activation using lignosulphonate (LS) as a carbon precursor and CaCO, KOH and ZnCO as activators. Carbon-based PCM composites with high performance were obtained by encapsulating paraffin wax (PW) in porous carbon supports. Results demonstrated that PW/HLPC exhibited comprehensive performance superior to other tested PW composites owing to its higher specific surface area (2,358 m/g), larger pore volume (1.1 cm/g) and well-interconnected framework structure. Additionally, PW/HLPC displayed relatively high latent heat (123.4 kJ/kg), photothermal conversion and storage efficiency (95 %), and photoelectric conversion performance (174.5 mV). Moreover, PW/HLPC also showed better leak-proof properties at 90 °C. The cycling stability and photothermal conversion performance of PW/HLPC were superior to those of the selected crude biochar-based PW composites. This study highlights the advantages of the prepared PW/HLPC for both the high-value utilization of lignin and its practical applications in solar-induced energy harvest, conversion, and storage.