Ariceta Alina, Chambrone Leandro, Stuhr Sandra, Couso-Queiruga Emilio
Department of Periodontology, School of Dentistry, Catholic University of Uruguay, Montevideo, Uruguay.
Evidence-Based Hub, Centro de Investigação Interdisciplinar Egas Moniz (CiiEM), Egas Moniz School of Health & Science, Monte de Caparica, Caparica, Portugal.
Clin Adv Periodontics. 2025 Jun;15(2):179-190. doi: 10.1002/cap.10312. Epub 2024 Sep 14.
To analyze the evidence about the influence of the suturing technique and material in terms of the percentage of mean root coverage (%MRC) following root coverage therapy in teeth diagnosed with single/localized gingival recession defects (GRD) via a monolaminar coronally advanced flap.
The protocol of this systematic review was registered in PROSPERO (CRD42024514043). A literature search was conducted to identify investigations that fulfilled the eligibility criteria. Variables of interest were extracted, subsequently categorized, and qualitatively analyzed.
A total of 15 randomized clinical trials, including 301 localized GRD in non-molar sites classified as Miller class I-II/RT1, in 253 patients were included. The studies reporting the combination of sling and single interrupted sutures, or interrupted sutures alone showed an MRC of 70.2%±16.6%, and 74.1%±0.75%, respectively. The highest MRC was observed in the studies using polyglactin 910 with a pooled value of 76.6% ± 15.3%, and monofilament materials, with a pooled MRC of 74.8%±7.1%. When the suturing diameter was evaluated, the highest pooled MRC with values of 79.1%±9.8% was observed with the use of 5-0.
For the treatment of single/localized GRD in non-molar sites via a monolaminar coronally advanced flap, the use of a combination of sling and single interrupted sutures, or single interrupted sutures, polyglactin 910 or monofilament materials, and material diameter of 5-0 showed a higher MRC as compared to the use of expanded polytetrafluoroethylene, and silk with/without dressing, and other suture diameters.
There were no differences in the percentage of root coverage achieved between the use of sling and single interrupted, versus single interrupted sutures alone on the treatment of single/localized GRD in non-molar sites. Polyglactin 910 and monofilament sutures resulted in a higher percentage of root coverage achieved as compared to expanded polytetrafluoroethylene, and silk with/without dressing. The use of 5-0 material diameter showed the highest percentage of root coverage achieved.
This study was primarily aimed at evaluating how different suturing techniques and materials could affect the percentage of root coverage in single/localized recession defects, without the use of soft tissue substitutes or autogenous soft tissue grafts. After the pooled analyses of 15 randomized clinical trials that fulfilled the inclusion criteria, we observed that the adequate selection of suturing techniques, materials, and size could lead to a higher percentage of root coverage. Specifically, the use of single interrupted with or without sling sutures at the most coronal portion, Polyglactin 910 or monofilament materials, and size of 5-0 showed a higher percentage of root coverage as compared to the use of expanded polytetrafluoroethylene, and silk with/without dressing, and other suture diameters.
通过单层冠向推进瓣治疗诊断为单颗/局限性牙龈退缩缺损(GRD)的牙齿时,分析缝合技术和材料对平均牙根覆盖百分比(%MRC)的影响证据。
本系统评价方案已在国际前瞻性系统评价注册库(PROSPERO,注册号:CRD42024514043)登记。进行文献检索以确定符合纳入标准的研究。提取感兴趣的变量,随后进行分类并进行定性分析。
共纳入15项随机临床试验,涉及253例患者的301个非磨牙部位的局限性GRD,分类为米勒I-II类/RT1。报告使用悬吊缝合与单间断缝合联合或仅单间断缝合的研究,其MRC分别为70.2%±16.6%和74.1%±0.75%。在使用聚乙醇酸910的研究中观察到最高的MRC,合并值为76.6%±15.3%,单丝材料的合并MRC为74.8%±7.1%。评估缝合直径时,使用5-0缝线观察到最高的合并MRC,值为79.1%±9.8%。
对于通过单层冠向推进瓣治疗非磨牙部位的单颗/局限性GRD,与使用膨体聚四氟乙烯、带或不带敷料的丝线以及其他缝合直径相比,使用悬吊缝合与单间断缝合联合或单间断缝合、聚乙醇酸910或单丝材料以及5-0的材料直径显示出更高的MRC。
在治疗非磨牙部位的单颗/局限性GRD时,使用悬吊缝合与单间断缝合联合与仅单间断缝合相比,在牙根覆盖百分比方面没有差异。与膨体聚四氟乙烯以及带或不带敷料的丝线相比,聚乙醇酸910和单丝缝合导致更高的牙根覆盖百分比。使用5-0材料直径显示出最高的牙根覆盖百分比。
本研究主要旨在评估不同的缝合技术和材料如何影响单颗/局限性退缩缺损的牙根覆盖百分比,且不使用软组织替代物或自体软组织移植。在对15项符合纳入标准的随机临床试验进行汇总分析后,我们观察到适当选择缝合技术、材料和尺寸可导致更高的牙根覆盖百分比。具体而言,与使用膨体聚四氟乙烯、带或不带敷料的丝线以及其他缝合直径相比,在最冠方使用单间断缝合(带或不带悬吊缝合)、聚乙醇酸910或单丝材料以及5-0的尺寸显示出更高的牙根覆盖百分比。