Lin Kai-Yi, Wu Yi-Fan, Aung Lwin Moe, Teng Nai-Chia, Sun Ying-Sui, Salamanca Eisner, Chang Wei-Jen
School of Dental Technology, College of Oral Medicine, Taipei Medical University Taipei Taiwan.
Department of Biomedical Engineering, Ming-Chuan University Taoyuan Taiwan.
RSC Adv. 2024 Sep 18;14(40):29455-29463. doi: 10.1039/d4ra03496a. eCollection 2024 Sep 12.
: Guided bone regeneration (GBR) uses bone grafts and barrier membranes to block soft tissue invasion and eventually create a new bone. Some studies indicate that a porcine bone graft demonstrates excellent biocompatibility and holds promise as a xenograft for GBR. However, only a few studies have investigated the effectiveness of this biomaterial after magnesium coating in improving osteoblast performance. : This study aimed to prove that the hydrothermal method can be used to coat magnesium oxide (MgO) on the surface of a porcine graft and enhance the biomaterial's property for better osteogenic differentiation of osteoblasts . : A porcine bone graft was produced, and the hydrothermal method was used to coat 2 mM and 5 mM of MgO on the graft. Material physiochemistry and biocompatibility analyses were performed at days 1, 3, and 5. : pH value assay results suggested that MgO slightly increased the alkalinity of the graft. SEM images showed that MgO with some surface roughness was coated on the porcine bone surface, and EDX indicated that the Mg and O element percentages increased by about 5% and 9%, respectively. The porcine graft coated with MgO was rougher than an uncoated porcine graft. FTIR analysis of the porcine graft implied that its chemical structure did not change due to MgO hydrothermal processing. Cell viability assay illustrated the highest cell proliferation with the porcine graft with 5 mM MgO ( < 0.001), and good cell attachment was observed on the graft with immunofluorescence using confocal laser scanning microscopy. Cell differentiation assay results revealed that the porcine graft with 5 mM MgO had the highest alkaline phosphate activity ( < 0.0001) among the uncoated porcine graft and the porcine graft with 2 mM MgO. Relative quantitative polymerase chain reaction (qPCR) at days 1 and 5 revealed upregulated osteoblast gene expression with a statistically significant difference. : The porcine graft hydrothermally coated with 5 mM MgO was more biocompatible and enhanced osteoblast differentiation. Thus, the findings of this study indicate that a porcine graft with 5 mM MgO has great potential as a bio-bone graft for guided bone regeneration.
引导骨再生(GBR)利用骨移植材料和屏障膜来阻止软组织侵入,并最终形成新骨。一些研究表明,猪骨移植材料具有优异的生物相容性,有望作为引导骨再生的异种移植材料。然而,仅有少数研究探讨了这种生物材料经镁涂层处理后在改善成骨细胞性能方面的有效性。
本研究旨在证明水热法可用于在猪骨移植材料表面包覆氧化镁(MgO),并增强该生物材料的性能,以促进成骨细胞更好地进行成骨分化。
制备了猪骨移植材料,并采用水热法在移植材料上包覆2 mM和5 mM的MgO。在第1天、第3天和第5天进行材料物理化学和生物相容性分析。
pH值测定结果表明,MgO使移植材料的碱性略有增加。扫描电子显微镜(SEM)图像显示,表面具有一定粗糙度的MgO包覆在猪骨表面,能量散射X射线光谱(EDX)表明Mg和O元素的百分比分别增加了约5%和9%。包覆MgO的猪骨移植材料比未包覆的更粗糙。傅里叶变换红外光谱(FTIR)对猪骨移植材料的分析表明,其化学结构并未因MgO水热处理而改变。细胞活力测定表明,含5 mM MgO的猪骨移植材料具有最高的细胞增殖率(P<0.001),通过共聚焦激光扫描显微镜进行免疫荧光观察发现,细胞在该移植材料上附着良好。细胞分化测定结果显示,在未包覆的猪骨移植材料和含2 mM MgO的猪骨移植材料中,含5 mM MgO的猪骨移植材料具有最高的碱性磷酸酶活性(P<0.0001)。第1天和第5天的相对定量聚合酶链反应(qPCR)结果显示,成骨细胞基因表达上调,差异具有统计学意义。
经水热法包覆5 mM MgO的猪骨移植材料具有更好的生物相容性,并能增强成骨细胞分化。因此,本研究结果表明,含5 mM MgO的猪骨移植材料作为引导骨再生的生物骨移植材料具有巨大潜力。