Mohammed Ahmed M E, Kotb Ahmed, Sanad Moustafa M S, Abdel-Hakim Mohamed, Ahmed Abdelaal S A
Chemistry Department, Faculty of Science, Al-Azhar University Assiut 71524 Egypt
Central Metallurgical Research and Development Institute P.O. Box 87 Helwan 11421 Cairo Egypt.
RSC Adv. 2024 Oct 2;14(43):31332-31347. doi: 10.1039/d4ra04889j. eCollection 2024 Oct 1.
In this study, the carbon sphere (Cs) has been prepared and modified by titania nanotubes (TNTs) to be utilized as an adsorbent toward crystal violet (CV) dye as a model for cationic dyes from aqueous solution. The prepared TNTs@Cs composites has been characterized by various techniques such as XRD, SEM, and TEM analysis. The adsorption analysis displayed that the adsorption capacity of CV dye onto the modified Cs with TNTs is 92.5 mg g, which is much higher than that achieved by pristine Cs (12.5 mg g). Various factors that influence the overall adsorption processes, such as pH, contact time, initial CV dye concentration, adsorbent weight, and temperature, were studied. The TNTs@Cs composite showed the highest removal percentage of 99.00% at optimum conditions. The adsorption isotherm analysis showed that the experimental data of adsorption CV dye fitted better with the Langmuir isotherm model with of 0.999, and the estimated maximum adsorption capacity was 84.7 mg g. On the other hand, the adsorption kinetic study showed that the adsorption of CV follows the pseudo-second order kinetic model with an equilibrium adsorption capacity ( ) of 10.66, 18.622, 47.61, and 48.31 mg g for Cs, TNTs@Cs, TNTs@Cs, and TNTs@Cs composites, respectively. The thermodynamic analysis showed negative free energy (Δ) values, this indicates that the adsorption of CV is a spontaneous and feasible process. Furthermore, the Δ and Δ are positive values that indicate an endothermic adsorption process. Furthermore, the prepared TNTs@Cs composite displayed remarkable adsorption stability and the removal efficiency of CV remains at 96.3% after five cycles.
在本研究中,已制备了碳球(Cs)并用二氧化钛纳米管(TNTs)对其进行改性,以用作从水溶液中吸附结晶紫(CV)染料的吸附剂,CV染料作为阳离子染料的模型。所制备的TNTs@Cs复合材料已通过多种技术进行表征,如XRD、SEM和TEM分析。吸附分析表明,CV染料在TNTs改性的Cs上的吸附容量为92.5 mg/g,远高于原始Cs的吸附容量(12.5 mg/g)。研究了影响整体吸附过程的各种因素,如pH值、接触时间、初始CV染料浓度、吸附剂重量和温度。TNTs@Cs复合材料在最佳条件下显示出最高去除率为99.00%。吸附等温线分析表明,吸附CV染料的实验数据与Langmuir等温线模型拟合得更好,相关系数为0.999,估计的最大吸附容量为84.7 mg/g。另一方面,吸附动力学研究表明,CV的吸附遵循准二级动力学模型,Cs、TNTs@Cs、TNTs@Cs和TNTs@Cs复合材料的平衡吸附容量(qe)分别为10.66、18.622、47.61和48.31 mg/g。热力学分析显示自由能(ΔG)值为负,这表明CV的吸附是一个自发且可行的过程。此外,ΔH和ΔS为正值,表明吸附过程是吸热的。此外,所制备的TNTs@Cs复合材料表现出显著的吸附稳定性,经过五个循环后,CV的去除效率仍保持在96.3%。