Hao Yingying, Bao Bingwei, Li Ran, Hou Chengyi, Li Yaogang, Zhang Qinghong, Li Kerui, Wang Hongzhi
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, P. R. China.
School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 Singapore.
ACS Appl Mater Interfaces. 2024 Oct 23;16(42):57571-57579. doi: 10.1021/acsami.4c13012. Epub 2024 Oct 10.
Due to the ordered one-dimensional channel as well as accessible redox sites, two-dimensional covalent organic frameworks (2D COFs) have garnered extensive attention in the field of electrochromism. However, organic 2D frameworks impose limitations on charge transfer and the weak interlayer interactions in 2D COFs, adversely affecting the stability during switching processes. Herein, we introduced Ti knots to construct three-dimensional metalated covalent organic frameworks (3D MCOFs), denoted as Ti-DHTA-Py. The Ti knots not only serve as templates for organizing organic units into unique 3D topological structures in a controlled manner but also establish charge transfer pathways conducive to electron delocalization and transmission within the framework. As a result, the 3D Ti-DHTA-Py MCOFs electrode exhibited a reduced band gap and remarkable electrochromic (EC) performances: electrochemical cyclic stability of 93.6% retention after 500 cycles, switching times (2.5 s/0.5 s), and a high coloration efficiency (423 cm C). This research underscores the potential of 3D MCOFs as promising candidates for advancing EC technologies, surmounting the limitations associated with traditional 2D COFs.
由于有序的一维通道以及可及的氧化还原位点,二维共价有机框架(2D COFs)在电致变色领域受到了广泛关注。然而,有机二维框架对电荷转移存在限制,且2D COFs中层间相互作用较弱,这对切换过程中的稳定性产生了不利影响。在此,我们引入钛节点来构建三维金属化共价有机框架(3D MCOFs),记为Ti-DHTA-Py。钛节点不仅作为模板以可控方式将有机单元组织成独特的三维拓扑结构,还建立了有利于框架内电子离域和传输的电荷转移途径。结果,3D Ti-DHTA-Py MCOFs电极表现出减小的带隙和显著的电致变色(EC)性能:500次循环后电化学循环稳定性保留93.6%,切换时间为2.5秒/0.5秒,以及高显色效率(423 cm²/C)。这项研究强调了3D MCOFs作为推进EC技术的有前途候选材料的潜力,克服了与传统2D COFs相关的局限性。