Occupational Radiation Exposure During Intraoperative 3-Dimensional Fluoroscopy in Pelvis and Acetabular Surgery.

OBJECTIVES

To quantify the occupational radiation exposure with a 3-dimensional (3D) fluoroscopic machine during routine use in pelvic and acetabular surgery and to determine whether the additional radiation exposure encountered with the 3D fluoroscopic spin is within previously accepted limits.

DESIGN

Prospective cohort study.

SETTING

Level I trauma center.

PATIENT SELECTION CRITERIA

All patients undergoing 3D fluoroscopy intraoperatively during pelvis (OTA/AO 61B,C) or acetabular (OTA/AO 62A-C) surgery between April 2021 and July 2021.

OUTCOME MEASURES AND COMPARISONS

Radiation dose at standardized locations around the operating room during the spin portion of the 3D fluoroscopy.

RESULTS

Seventy-six 3D spins were performed on 69 patients during the study period. The average emitted radiation dose from the machine for the routine fluoroscopy portion of the case was 74.5 mGy. The average displayed radiation dose in the air for the spin portion of the case was 39.9 mGy, an average of 53.6% less radiation than the routine fluoroscopy portion. For the spin portion, the average radiation exposure seen by the patient was 3.42 mGy (centered on the patient) and the average maximal exposure in the room was 0.062 mGy. Minimal radiation was detected outside the operating room doors.

CONCLUSIONS

The radiation exposure encountered by operating room personnel with 3D fluoroscopy appears to be within safe occupational limits. The marginal increase in radiation exposure during pelvic and acetabular surgery should not discourage the use of 3D imaging intraoperatively.

LEVEL OF EVIDENCE

Level IV, Case Series.