Regeneration and Single Stage Batch Adsorber Design for Efficient Basic Blue-41 Dye Removal by Porous Clay Heterostructures Prepared from Al13 Montmorillonite and Pillared Derivatives.

Porous clay heterostructures are a hybrid precursor between the pillaring process and organoclays. In this study, the organoclay was substituted by an aluminium intercalated species clay or pillared alumina clays. A porous clay heterostructure was successfully achieved from an aluminium intercalated species clay, due to the easy exchange of the aluminium species by the cosurfactant and silica species. However, using alumina pillared clays, the porous clay heterostructures were not formed; the alumina species were strongly attached to clay sheets which made difficult their exchange with cosurfactant molecules. In this case, the silica species were polymerized and decorated the surface of the used materials as indicated by different characterization techniques. The specific surface area of the porous clay heterostructure material reached 880 m/g, and total pore volume of 0.258 cc/g, while the decorated silica alumina pillared clays exhibited lower specific surface area values of 244-440 m/g and total pore volume of 0.315 to 0.157 cc/g. The potential of the synthesized materials was evaluated as a basic blue-41 dye removal agent. Porous clay heterostructure material has a removal capacity of 279 mg/g; while the other materials exhibited lower removal capacities between 75 mg/g and 165 mg/g. The used regeneration method was related to the acidity of the studied materials. The acidity of the materials possessed an impact on the adopted regeneration procedure in this study, the removal efficiency was maintained at 80% of the original performance after three successive regeneration cycles for the porous clay heterostructure. The Langmuir isotherm characteristics were used to propose a single-stage batch design. Porous clay heterostructures with a higher removal capacity resulted in a decrease in the quantities needed to achieve the target removal percentage of the BB-41 dye from an aqueous solution.