Kabu Ryosuke, Tsushima Hidetoshi, Akasaki Yukio, Kawahara Shinya, Hamai Satoshi, Nakashima Yasuharu
Department of Orthopedic Surgery, Saga Ken Medical Centre Koseikan, Saga, 840-0861, Japan.
Department of Orthopedic Surgery, Saiseikai Yahata General Hospital, Fukuoka, 805-0050, Japan.
Arthroplasty. 2024 Nov 4;6(1):54. doi: 10.1186/s42836-024-00277-9.
In total knee arthroplasty (TKA), asymmetric tibial components have been developed alongside symmetric tibial components to enhance bony coverage at the tibia. In primary TKA and revision TKA for patients with significant bone defects, augmentation is employed to fill the bone defect. However, there have been no reports on bony coverage of the tibial component of the revision system in the cases of bone defects. Therefore, we simulated bone defects using CT and compared the bony coverage of asymmetric and symmetric tibial components in the revision TKA system.
This study included 45 patients (50 knees involved) with medial osteoarthritis. Preoperative CT scans were used to simulate placement using ZedKnee. Three models were evaluated: Persona Revision PCCK (Zimmer) for the asymmetric component, NexGen LCCK (Zimmer) for the symmetric component, and the ATTUNE revision system (Depuy-Synthes). A 130-mm stem extension was utilized. Augmentations of each thickness were placed to simulate bone defects of 5, 10, and 15 mm. The coverage, overhang, and underhang rates were measured for each slice and compared among the models.
In terms of coverage, the rate was greater for PCCK at 0 mm, and only ATTUNE exhibited a significantly lower coverage at 5 and 10 mm. There was no significant difference in coverage at 15 mm. At 0 mm, PCCK demonstrated less posterior underhangs. At 5 and 10 mm, PCCK showed less anterior overhang but more anterior underhang. At 15 mm, PCCK had a less anterior overhang, with an overhang in the posterior region but less underhang. When overhang and underhang were combined and compared, the asymmetric component generally yielded superior results.
In the cases of bone defects, asymmetric components demonstrated reduced anterior overhang and decreased posterior underhang, resulting in greater bone coverage. This may contribute to improved long-term outcomes in the revision TKA system.
在全膝关节置换术(TKA)中,不对称胫骨组件与对称胫骨组件一同得到了发展,以增强胫骨的骨覆盖。在初次TKA以及针对有明显骨缺损患者的翻修TKA中,采用骨增量来填补骨缺损。然而,尚无关于骨缺损病例中翻修系统胫骨组件骨覆盖情况的报道。因此,我们利用CT模拟骨缺损,并比较了翻修TKA系统中不对称和对称胫骨组件的骨覆盖情况。
本研究纳入了45例(涉及50个膝关节)内侧骨关节炎患者。术前CT扫描用于使用ZedKnee模拟植入。评估了三种模型:用于不对称组件的Persona Revision PCCK(捷迈公司)、用于对称组件的NexGen LCCK(捷迈公司)以及ATTUNE翻修系统(德普伊-辛迪斯公司)。使用了130毫米的柄部延长件。放置不同厚度的骨增量以模拟5毫米、10毫米和15毫米的骨缺损。测量每个层面的覆盖、悬垂和下沉率,并在各模型之间进行比较。
在覆盖方面,PCCK在0毫米时的覆盖率更高,只有ATTUNE在5毫米和10毫米时的覆盖率显著较低。15毫米时的覆盖率无显著差异。在0毫米时,PCCK的后部下悬垂较少。在5毫米和10毫米时,PCCK显示前部悬垂较少但前部下悬垂较多。在15毫米时,PCCK的前部悬垂较少,后部有悬垂但下悬垂较少。当将悬垂和下悬垂合并比较时,不对称组件总体上产生了更好的结果。
在骨缺损病例中,不对称组件显示出前部悬垂减少和后部下悬垂减少,从而实现了更大的骨覆盖。这可能有助于改善翻修TKA系统的长期效果。