Suppr超能文献

具有内侧旋转中心设计的低限制性植入物作为保留交叉韧带全膝关节置换术良好预后的潜在预测指标:一项倾向评分匹配分析。

Low-constraint insert with a medial pivot design as a potential predictor of favourable outcomes in cruciate-retaining total knee arthroplasty: A propensity score-matched analysis.

作者信息

Okamoto Yoshinori, Saika Takafumi, Okayoshi Tomohiro, Ishitani Takashi, Wakama Hitoshi, Otsuki Shuhei

机构信息

Department of Orthopedic Surgery, Osaka Medical and Pharmaceutical University, Takatsuki, Japan.

Department of Orthopedic Surgery, Saiseikai Ibaraki Hospital, Ibaraki, Japan.

出版信息

Knee Surg Sports Traumatol Arthrosc. 2025 Apr;33(4):1397-1408. doi: 10.1002/ksa.12534. Epub 2024 Nov 4.

Abstract

PURPOSE

The influence of polyethylene insert conformity on the outcomes of cruciate-retaining (CR) total knee arthroplasty (TKA) with a medial pivot design remains uncertain. Therefore, this study aimed to evaluate the effects of polyethylene insert conformity in CR-TKA on patient-reported outcomes.

METHODS

The data of 255 knees (FINE Total Knee System) from 255 patients were retrospectively analysed to compare outcomes for high- or low-constraint medial pivot inserts, as determined through historical controls, over an average follow-up period of 2.2 years (range, 2.0-5.5 years). Multivariate logistic regression analysis was used to identify predictors of achieving the patient-acceptable symptom state (PASS) for the Forgotten Joint Score-12 (FJS-12). Propensity score-matched cohorts for age, sex, body mass index, Kellgren-Lawrence grade, Charlson Comorbidity Index, knee flexion contracture, FJS-12 and follow-up duration were created for between-group comparison (n = 50 in each group).

RESULTS

Low-constraint insert (p = 0.031) and age (p = 0.043) were independent predictors of achieving the PASS for the FJS-12 (>33, 153/255). After successful matching, compared to the high-constraint insert, the low-constraint insert improved patient satisfaction (p = 0.029 for pain on going up or downstairs, and p = 0.047 for the function of going upstairs) and increased the likelihood of achieving the minimal clinically important difference (p = 0.019) and PASS (p = 0.025) for the FJS-12. A significant correlation was observed between the posterior tibial slope and the FJS-12 in the low-constraint insert group (p < 0.001), indicating that a greater posterior tibial slope was associated with better functional outcomes in this group.

CONCLUSIONS

Compared with high-constraint inserts, low-constraint medial pivot inserts yielded higher functional outcomes and patient satisfaction. Therefore, insert conformity may play a crucial role in CR-TKA outcomes.

LEVEL OF EVIDENCE

Level III.

摘要

目的

聚乙烯衬垫贴合度对采用内侧旋转铰链设计的保留交叉韧带(CR)全膝关节置换术(TKA)结果的影响尚不确定。因此,本研究旨在评估CR-TKA中聚乙烯衬垫贴合度对患者报告结局的影响。

方法

回顾性分析255例患者的255个膝关节(FINE全膝关节系统)数据,通过历史对照比较高约束或低约束内侧旋转铰链衬垫的结局,平均随访时间为2.2年(范围2.0 - 5.5年)。采用多因素逻辑回归分析确定遗忘关节评分12(FJS-12)达到患者可接受症状状态(PASS)的预测因素。为进行组间比较(每组n = 50),创建年龄、性别、体重指数、凯尔格伦-劳伦斯分级、查尔森合并症指数、膝关节屈曲挛缩、FJS-12和随访时间的倾向评分匹配队列。

结果

低约束衬垫(p = 0.031)和年龄(p = 0.043)是FJS-12达到PASS(>33,153/255)的独立预测因素。成功匹配后,与高约束衬垫相比,低约束衬垫提高了患者满意度(上下楼梯疼痛p = 0.029,上楼功能p = 0.047),并增加了FJS-12达到最小临床重要差异(p = 0.019)和PASS(p = 0.025)的可能性。在低约束衬垫组中,观察到胫骨后倾与FJS-12之间存在显著相关性(p < 0.001),表明该组中更大的胫骨后倾与更好的功能结局相关。

结论

与高约束衬垫相比,低约束内侧旋转铰链衬垫产生了更高的功能结局和患者满意度。因此,衬垫贴合度可能在CR-TKA结局中起关键作用。

证据水平

III级。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验