Mansur Alexandra A P, Carvalho Sandhra M, Brito Ramayana M de M, Capanema Nádia S V, Duval Isabela de B, Cardozo Marcelo E, Rihs José B R, Lemos Gabriela G M, Lima Letícia C D, Reys Marina P Dos, Rodrigues Ana P H, Oliveira Luiz C A, Sá Marcos Augusto de, Cassali Geovanni D, Bueno Lilian L, Fujiwara Ricardo T, Lobato Zelia I P, Mansur Herman S
Center of Nanoscience, Nanotechnology, and Innovation-CeNano2I, Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais, UFMG, Av. Presidente Antônio Carlos, 6627-Escola de Engenharia, Bloco 2-Sala 2233, Belo Horizonte 31270-901, MG, Brazil.
Laboratory of Immunobiology and Control of Parasites, Department of Parasitology, Institute of Biological Sciences, Federal University of Minas Gerais, UFMG, Belo Horizonte 31270-901, MG, Brazil.
Gels. 2024 Oct 23;10(11):679. doi: 10.3390/gels10110679.
Wound healing is important for skin after deep injuries or burns, which can lead to hospitalization, long-term morbidity, and mortality. In this field, tissue-engineered skin substitutes have therapy potential to assist in the treatment of acute and chronic skin wounds, where many requirements are still unmet. Hence, in this study, a novel type of biocompatible ternary polymer hybrid hydrogel scaffold was designed and produced through an entirely eco-friendly aqueous process composed of carboxymethyl cellulose, chitosan, and polyvinyl alcohol and chemically cross-linked by citric acid, forming three-dimensional (3D) matrices, which were biofunctionalized with L-arginine (L-Arg) to enhance cellular adhesion. They were applied as bilayer skin biomimetic substitutes based on human-derived cell cultures of fibroblasts and keratinocytes were seeded and grown into their 3D porous structures, producing cell-based bio-responsive hybrid hydrogel scaffolds to assist the wound healing process. The results demonstrated that hydrophilic hybrid cross-linked networks were formed via esterification reactions with the 3D porous microarchitecture promoted by foam templating and freeze-drying. These hybrids presented chemical stability, physicochemical properties, high moisture adsorption capacity, surface properties, and a highly interconnected 3D porous structure well suited for use as a skin substitute in wound healing. Additionally, the surface biofunctionalization of these 3D hydrogel scaffolds with L-arginine through amide bonds had significantly enhanced cellular attachment and proliferation of fibroblast and keratinocyte cultures. Hence, the in vivo results using mouse models (an immunocompromised strain) confirmed that these responsive bio-hybrid hydrogel scaffolds possess hemocompatibility, bioadhesion, biocompatibility, adhesiveness, biodegradability, and non-inflammatory behavior and are capable of assisting the skin wound healing process.
伤口愈合对于深度受伤或烧伤后的皮肤至关重要,这可能导致住院、长期发病和死亡。在该领域,组织工程皮肤替代物具有治疗潜力,可协助治疗急性和慢性皮肤伤口,但许多需求仍未得到满足。因此,在本研究中,通过由羧甲基纤维素、壳聚糖和聚乙烯醇组成的完全环保的水性工艺设计并制备了一种新型生物相容性三元聚合物混合水凝胶支架,并通过柠檬酸进行化学交联,形成三维(3D)基质,用L-精氨酸(L-Arg)进行生物功能化以增强细胞粘附。它们被用作基于人成纤维细胞和角质形成细胞培养物的双层皮肤仿生替代物,将细胞接种并生长到其3D多孔结构中,制备基于细胞的生物响应性混合水凝胶支架以协助伤口愈合过程。结果表明,通过泡沫模板和冷冻干燥促进的酯化反应形成了具有3D多孔微结构的亲水性混合交联网络。这些混合物具有化学稳定性、物理化学性质、高吸湿能力、表面性质以及高度互连的3D多孔结构,非常适合用作伤口愈合中的皮肤替代物。此外,这些3D水凝胶支架通过酰胺键用L-精氨酸进行表面生物功能化,显著增强了成纤维细胞和角质形成细胞培养物的细胞附着和增殖。因此,使用小鼠模型(免疫缺陷菌株)的体内结果证实,这些响应性生物混合水凝胶支架具有血液相容性、生物粘附性、生物相容性、粘附性、生物降解性和非炎症行为,并且能够协助皮肤伤口愈合过程。