Suppr超能文献

用于脑积水治疗的亚毫米鸭嘴阀的制造及体内测试

Fabrication and in vivo testing of a sub-mm duckbill valve for hydrocephalus treatment.

作者信息

Jung Yuna, Gulick Daniel, Blain Christen Jennifer

机构信息

Department of Electrical, Computer and Energy Engineering, Arizona State University, 650 E. Tyler Mall, Tempe, AZ, USA.

出版信息

Microsyst Nanoeng. 2024 Dec 14;10(1):190. doi: 10.1038/s41378-024-00829-8.

Abstract

Hydrocephalus is characterized by the accumulation of excess cerebrospinal fluid (CSF) in the cranium due to an imbalance between production and absorption of CSF. The standard treatment involves the implantation of a shunt to divert excess CSF into the peritoneal cavity, but these shunts exhibit high failure rates over time. In pursuit of improved reliability and performance, this study proposes a miniaturized valve designed to mimic the natural one-way valve function of the arachnoid granulations and thereby replace the shunts. A benchtop testing setup was employed to characterize the behavior of the fabricated valve. Additionally, an animal study was conducted to assess the valve's in vivo performance. This involved the injection of saline into the lateral ventricle to elevate intracranial pressure (ICP), followed by the drainage of the saline through the valve inserted into the cisterna magna (CM) to reduce pressure. Our prototype features a silicone duckbill valve design combined with a silicone tube as an inlet. Through benchtop testing, the valve exhibited unidirectional flow with negligible reverse leakage, revealing that critical parameters such as the width of the fluid channel (W) and bill length (L) could be controlled to optimize valve performance. Notably, the valve configuration with W= 0.8mm and L < 0.5mm achieved the lowest cracking pressure (2.22 ± 0.07 mmHg) and outflow resistance (22.00 ± 0.70 mmHg/mL/min) within the low cracking pressure range of conventional shunts. Our observations of the in vivo test demonstrated that when untreated states, pressure differences from baseline to peak exceeded 20 mmHg due to the absence of drainage, resulting in sustained pressure elevation. Conversely, upon treating states by removing the clamp, pressure differences from baseline to peak remained below 5 mmHg, indicating effective drainage of injected saline through the valve. These promising results highlight the potential of the miniaturized duckbill valve as an alternative for ICP management in hydrocephalus, offering improved control and reliability compared to conventional shunting systems. Further research is required to evaluate the valve's performance as a chronic implant.

摘要

脑积水的特征是由于脑脊液(CSF)生成与吸收之间的失衡,导致颅骨内积聚过多脑脊液。标准治疗方法是植入分流器,将多余的脑脊液引流至腹腔,但随着时间的推移,这些分流器显示出较高的故障率。为了提高可靠性和性能,本研究提出了一种小型化瓣膜,旨在模拟蛛网膜颗粒的天然单向瓣膜功能,从而取代分流器。采用台式测试装置来表征所制造瓣膜的性能。此外,还进行了一项动物研究,以评估该瓣膜的体内性能。这包括向侧脑室注射生理盐水以升高颅内压(ICP),然后通过插入枕大池(CM)的瓣膜排出生理盐水以降低压力。我们的原型采用硅胶鸭嘴阀设计,并结合硅胶管作为入口。通过台式测试,该瓣膜呈现单向流动,反向泄漏可忽略不计,这表明诸如流体通道宽度(W)和瓣膜长度(L)等关键参数可以得到控制,以优化瓣膜性能。值得注意的是,在传统分流器的低开启压力范围内,W = 0.8mm且L < 0.5mm的瓣膜配置实现了最低的开启压力(2.22 ± 0.07 mmHg)和流出阻力(22.00 ± 0.70 mmHg/mL/min)。我们对体内测试的观察表明,在未治疗状态下,由于没有引流,基线到峰值的压力差超过20 mmHg,导致压力持续升高。相反,在通过移除夹子进行治疗的状态下,基线到峰值的压力差保持在5 mmHg以下,表明注入的生理盐水通过瓣膜得到了有效引流。这些有前景的结果突出了小型化鸭嘴阀作为脑积水颅内压管理替代方案的潜力,与传统分流系统相比,具有更好的控制和可靠性。需要进一步研究来评估该瓣膜作为长期植入物的性能。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/e586/11646279/6dbed7827d77/41378_2024_829_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验