Simulation and quantitative evaluation of three surgical techniques of endoscopic enucleation of prostate on a realistic phantom model.

OBJECTIVE

To evaluate the impact of three different AEEP techniques on the training performance of novices using a realistic hydrogel prostate phantom model.

MATERIAL AND METHODS

The experimental setup utilized realistic prostate phantom model provided by the Max Planck Institute for Intelligent Systems, Germany. For the enucleation, we utilized a new solid-state pulsed thulium laser (Thulio®, Dornier MedTech, Weßling, Germany). We explored three different AEEP techniques-bilobar, trilobar, and en-bloc-repeated ten times each, totaling 30 procedures.

RESULTS

Median enucleation time was 9.5 min (range: 6-16), median laser time was 4.29 min (3.21-6.34), median total energy used was 25.8 kJ (19.4-38.1), and median number of laser pulses was 12.8 thousand (9.7-17). There were no significant differences in operation time, laser time, pulses, or joules among the en-bloc, two-lobe, and three-lobe techniques (p = 0.113, 0.143, 0.148, 0.141 respectively). Ultrasound evaluations showed the one-lobe technique to be superior in accuracy, smoothness, and circularity (p = 0.0002, 0.012, 0.00005 respectively) (Figs. 9, 10, 11), despite having the highest perforation rate, which was not statistically significant compared to other techniques (p = 1.4). The one-lobe technique's higher accuracy may increase the risk of perforation. In contrast, the three-lobe technique had the lowest perforation rate and removal efficiency due to its lower accuracy.

CONCLUSION

The en-bloc, bilobar, and trilobar enucleation techniques exhibited comparable operation times. The one-lobe method emerged as superior in terms of accuracy, smoothness, and circularity. However, it also presented the highest rate of perforation.