Kazama Ryotaro, Ishikawa Rina, Sakai Shinji
Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka 560-8531, Osaka, Japan.
Bioengineering (Basel). 2024 Dec 23;11(12):1303. doi: 10.3390/bioengineering11121303.
Lymphocytes are generally non-adherent. This makes it challenging to fabricate three-dimensional (3D) structures mimicking the three-dimensional lymphoma microenvironment in vivo. This study presents the fabrication of a hemispherical 3D lymphoma model using the on-chip Cell Dome system with a hemispherical cavity (1 mm in diameter and almost 300 µm in height). Both the human brain lymphoma cell line (TK) and human B cell lymphoma cell line (KML-1) proliferated and filled the cavities. Hypoxic regions were observed in the center of the hemispherical structures. CD19 expression did not change in either cell line, while CD20 expression was slightly upregulated in TK cells and downregulated in KML-1 cells cultured in the Cell Dome compared to those cultured in two-dimensional (2D) flasks. In addition, both TK and KML-1 cells in the hemispherical structures exhibited higher resistance to doxorubicin than those in 2D flasks. These results demonstrate the effectiveness of the on-chip Cell Dome for fabricating 3D lymphoma models and provide valuable insights into the study of lymphoma behavior and the development of new drugs for lymphoma treatment.
淋巴细胞通常不具有黏附性。这使得构建模仿体内三维淋巴瘤微环境的三维(3D)结构具有挑战性。本研究展示了使用具有半球形腔(直径1毫米,高度近300微米)的芯片上细胞穹顶系统构建半球形3D淋巴瘤模型。人脑淋巴瘤细胞系(TK)和人B细胞淋巴瘤细胞系(KML-1)均增殖并填充了这些腔。在半球形结构的中心观察到缺氧区域。两种细胞系中CD19的表达均未改变,而与在二维(2D)培养瓶中培养的细胞相比,在细胞穹顶中培养的TK细胞中CD20表达略有上调,KML-1细胞中CD20表达下调。此外,半球形结构中的TK和KML-1细胞对多柔比星的耐药性均高于2D培养瓶中的细胞。这些结果证明了芯片上细胞穹顶在构建3D淋巴瘤模型方面的有效性,并为淋巴瘤行为研究和淋巴瘤治疗新药开发提供了有价值的见解。