Moga Radu-Andrei, Olteanu Cristian Doru, Delean Ada Gabriela
Department of Cariology, Endodontics and Oral Pathology, School of Dental Medicine, University of Medicine and Pharmacy Iuliu Hatieganu, Str. Motilor 33, 400001 Cluj-Napoca, Romania.
Department of Orthodontics, School of Dental Medicine, University of Medicine and Pharmacy Iuliu Hatieganu, Str. Avram Iancu 31, 400083 Cluj-Napoca, Romania.
Medicina (Kaunas). 2024 Dec 12;60(12):2045. doi: 10.3390/medicina60122045.
: Most orthodontic forces are absorbed-dissipated before reaching the dental pulp and its neuro-vascular bundle (NVB); however, no data are available about their amounts. The objective of this study was to assess the amount of orthodontic force that reaches the dental pulp and its NVB during orthodontic movements in a healthy periodontium. : This study involved the second lower premolars of nine patients and 180 numerical simulations. Five orthodontic movements (intrusion, extrusion, rotation, translation, and tipping) under 0.5 N/5 KPa and 4 N/40 KPa were assessed. The numerical methods included only two failure criteria suitable for dental tissue (of ductile resemblance): Von Mises (VM) (overall, homogenous) and Tresca (shear, non-homogenous). : Both forces displayed a similar color-coded stress display for the two methods. The Tresca quantitative results were 1.11 times higher than the VM but lower than the maximum physiological hydrostatic circulatory pressure. The biomechanical behavior of the pulp and NVB showed that, in the intact periodontium, the NVB-induced stress was 5.7 higher than in the pulp. Quantitatively, the rotation movement seemed to be the most stressful for the NVB, closely followed by intrusion and extrusion. For the dental pulp, rotation remained the most stressful, closely followed by tipping and translation. Tissue deformations were visible for NVB areas during intrusion and extrusion. The dental pulp showed pulpal stresses under translation and rotation. The numerical simulations with the two methods showed that, in the intact periodontium, only a small amount of the initial orthodontic load produced effects in the NVB and dental pulp. Only about 2.85% of the initial orthodontic load of 40 KPa/4 N applied at the bracket level induced stresses in the NVB, while the dental pulp was reached by 0.5% of the applied force. A similar distribution was seen at 5 KPa/0.5 N. : The absorption-dissipation ability of the dental tissue varies between 97.15 and 99.98%.
大多数正畸力在到达牙髓及其神经血管束(NVB)之前就被吸收消散了;然而,关于其具体数值尚无相关数据。本研究的目的是评估在健康牙周组织进行正畸移动过程中到达牙髓及其NVB的正畸力大小。
本研究纳入了9名患者的下颌第二前磨牙,并进行了180次数值模拟。评估了在0.5 N/5 KPa和4 N/40 KPa下的五种正畸移动(压入、伸出、旋转、平移和倾斜)。数值方法仅包括两种适用于牙齿组织(类似延性材料)的失效准则:冯·米塞斯(VM)准则(整体、均匀)和特雷斯卡准则(剪切、非均匀)。
两种力在两种方法下均呈现出相似的彩色编码应力显示。特雷斯卡准则的定量结果比VM准则高1.11倍,但低于最大生理静水压循环压力。牙髓和NVB的生物力学行为表明,在完整的牙周组织中,NVB引起的应力比牙髓高5.7倍。从定量角度来看,旋转移动对NVB似乎压力最大,紧随其后的是压入和伸出。对于牙髓来说,旋转仍然是压力最大的,其次是倾斜和平移。在压入和伸出过程中,NVB区域可见组织变形。牙髓在平移和旋转时显示出牙髓应力。两种方法的数值模拟表明,在完整的牙周组织中,最初的正畸负荷只有一小部分会对NVB和牙髓产生影响。在托槽水平施加的40 KPa/4 N的初始正畸负荷中,只有约2.85%会在NVB中产生应力,而牙髓受到的是施加力的0.5%。在5 KPa/0.5 N时也观察到类似的分布情况。
牙齿组织的吸收消散能力在97.15%至99.98%之间变化。