Initial Pose Estimation Method for Robust LiDAR-Inertial Calibration and Mapping.

Handheld LiDAR scanners, which typically consist of a LiDAR sensor, Inertial Measurement Unit, and processor, enable data capture while moving, offering flexibility for various applications, including indoor and outdoor 3D mapping in fields such as architecture and civil engineering. Unlike fixed LiDAR systems, handheld devices allow data collection from different angles, but this mobility introduces challenges in data quality, particularly when initial calibration between sensors is not precise. Accurate LiDAR-IMU calibration, essential for mapping accuracy in Simultaneous Localization and Mapping applications, involves precise alignment of the sensors' extrinsic parameters. This research presents a robust initial pose calibration method for LiDAR-IMU systems in handheld devices, specifically designed for indoor environments. The research contributions are twofold. Firstly, we present a robust plane detection method for LiDAR data. This plane detection method removes the noise caused by mobility of scanning device and provides accurate planes for precise LiDAR initial pose estimation. Secondly, we present a robust planes-aided LiDAR calibration method that estimates the initial pose. By employing this LiDAR calibration method, an efficient LiDAR-IMU calibration is achieved for accurate mapping. Experimental results demonstrate that the proposed method achieves lower calibration errors and improved computational efficiency compared to existing methods.