Enhancing the Rheological and Filtration Performance of Water-Based Drilling Fluids Using Silane-Coated Aluminum Oxide NPs.

For optimizing the drilling efficiency, nanoparticles (NPs) specifically nanometal oxides have been used in water-based drilling fluids (WBDF). Nano metal oxides improve the rheological and filtration characteristics of the WBDF. However, dispersion instability among pristine nano metals shrinks the performance of the nanometal oxides due to high surface energy. Therefore, this study aims to utilize silane-coated aluminum oxide NPs (S-AlO) as an alternative to widely used pristine aluminum oxide (P-AlO) in water-based drilling fluids. The S-AlO NPs were synthesized using 3-aminopropyl triethoxysilane (APTES). FTIR, XRD, and SEM analyses were carried out to examine the crystalline structure and surface morphology of NPs. Moreover, the rheological and filtration properties of nanowater-based drilling fluids were investigated at low-pressure and low-temperature (LPLT) conditions. The results of experiments revealed that S-AlO NPs significantly upgraded the rheological properties compared to P-AlO NPs. The S-AlO NPs reduced plastic viscosity from 12.6 to 9.6 cP, apparent viscosity from 34.5 to 26.5 cP, and yield point from 46.5 to 39.5 lb/100 ft. The gel strengths (10 s and 10 min) were reduced from 44.5 to 32 lb/100 ft and from 77 to 59 lb/100 ft, respectively. Furthermore, S-AlO NPs enhanced the filtration performance, achieving a 26% reduction in filtrate loss and forming a thinner, more impermeable mud cake than P-AlO NPs. In conclusion, the application of S-AlO NPs in water-based drilling fluid was found to be effective in improving the rheological properties and controlling the filtrate loss effectively under LPLT conditions. The utilization of silane-coated NPs used in this study will open new and novel doors of research in the fields of both drilling engineering and nanotechnology.