Seo Sung-Hee, Xia Tian, Islam Md Kamrul, Batterman Stuart
Department of Environmental Health Sciences, School of Public Health, University of Michigan, Ann Arbor, MI, 48109, United States; School of Liberal Studies, Kunsan National University, 558 Daehak-ro, Gunsan, Jeollabuk-Do 54150, Republic of Korea.
Department of Environmental Health Sciences, School of Public Health, University of Michigan, Ann Arbor, MI, 48109, United States.
Sci Total Environ. 2025 Feb 10;964:178582. doi: 10.1016/j.scitotenv.2025.178582. Epub 2025 Jan 21.
Polychlorinated naphthalenes (PCNs) and polychlorinated biphenyls (PCBs) are toxic contaminants that were produced and used in large quantities for their stability, inertness, and other desirable electrical, cooling, and lubricating properties. Due to their environmental persistence and improper disposal, these contaminants have become broadly distributed in the environment. This study examines the levels, composition, distribution, and potential sources of these compounds in surface soils and street dusts collected at 19 residential and industrial areas in Detroit, Michigan. Each sample was analyzed for 32 PCN and 37 PCB congeners using gas chromatography/mass spectrometry. The geometric mean concentrations of total PCNs and total PCBs were 61 (range:11-1933) and 432 (range: 32-18,637) ng/g, respectively. The most common PCNs were tetra- to hexacongeners and PCN-59 was most prevalent individual congener. For PCBs, hexaPCBs were most common and PCB-158 was dominant. PCN and PCB levels in soils at most sites exceeded health-based guideline levels. Given the short half-lives of PCNs and restrictions on PCN and PCB production, our results imply ongoing or recent releases. Emission sources identified by principal components and other analyses include industrial thermal processes included fuel combustion and electrical waste handling at a scrap metal processor for PCNs and PCBs, respectively. The presence of sources and "hotspots" of these toxic "legacy" contaminants in urban settings like Detroit highlight the potential for human exposure and the need to identify and control sources to prevent further environmental dispersal, exposure and risk.
多氯萘(PCNs)和多氯联苯(PCBs)是有毒污染物,因其稳定性、惰性以及其他理想的电气、冷却和润滑性能而被大量生产和使用。由于它们在环境中具有持久性且处置不当,这些污染物已在环境中广泛分布。本研究调查了在密歇根州底特律市19个住宅和工业区采集的表层土壤和街道灰尘中这些化合物的含量、组成、分布及潜在来源。使用气相色谱/质谱法对每个样品中的32种PCN同系物和37种PCB同系物进行了分析。总PCNs和总PCBs的几何平均浓度分别为61(范围:11 - 1933)和432(范围:32 - 18637)ng/g。最常见的PCNs是四至六氯代同系物,PCN - 59是最普遍的单个同系物。对于PCBs,六氯代PCBs最常见,PCB - 158占主导地位。大多数地点土壤中的PCN和PCB含量超过了基于健康的指导水平。鉴于PCNs的半衰期较短以及对PCN和PCB生产的限制,我们的结果表明存在持续或近期的排放。通过主成分分析和其他分析确定的排放源包括工业热过程,对于PCNs和PCBs而言,分别包括燃料燃烧和一家金属废料处理厂的电子废物处理。在底特律这样的城市环境中存在这些有毒“遗留”污染物的来源和“热点”,凸显了人类接触的可能性以及识别和控制来源以防止进一步的环境扩散、接触和风险的必要性。