Suppr超能文献

锁骨中段骨折的低轮廓双钢板与传统单钢板固定:一项回顾性研究及该新技术的初步经验

Low-profile double plating versus conventional single plating in midshaft clavicle fractures: A retrospective study and initial experience with this novel technique.

作者信息

Lecoultre Yannic, van de Wall Bryan, Link Bjoern-Christian, Kik Charlotte, Babst Reto, Beeres Frank

机构信息

Department of Orthopedic and Trauma Surgery, Lucerne Cantonal Hospital, Lucerne, Switzerland.

Faculty of Health Sciences and Medicine, University of Lucerne, Lucerne, Switzerland.

出版信息

PLoS One. 2025 Jan 24;20(1):e0318004. doi: 10.1371/journal.pone.0318004. eCollection 2025.

Abstract

BACKGROUND

Low-profile double plating seems a viable alternative to conventional single plating for fixation of midshaft clavicle fractures. This study aims to compare the two techniques regarding healing, complications, and removal rate.

METHODS

This retrospective cohort study included all patients >16 years that underwent plate fixation for midshaft clavicle fractures between 2020 and 2022 at one trauma-center. Exclusion criteria encompassed pathological or open fractures, refractures and delayed presentation or treatment more than 14 days after the accident. Patients were categorized into two treatment groups: Single plating (Synthes 3.5mm LCP superior / anterior or Synthes 2.7mm VA-LCP superior) and low-profile double plating (2.0 superior combined with either 2.4 or 2.7mm anterior mini-plate). Treatment groups were compared regarding healing, complications, and removal rate.

RESULTS

A total of 99 patients were included: 74 in the single plating and 25 in the double plating group. Implant failures within the first three months were comparable in both groups (4.0% double plating versus 2.7% single, p = 0.744, of which one was caused by infection). Low-profile double plating had a significantly lower operation duration (95 versus 111 minutes, p = 0.019). Long-term follow-up data was available in 60 patients in the single plating and 20 in the double plating group. The need for reintervention was significantly lower in the double plating group (n = 5, 25.0% vs. n = 31, 51.7%, p = 0.038). These reinterventions were predominantly caused by implant irritation in both groups (n = 4, 20% double plating versus n = 29, 48.3% single plating, p = 0.026). All fractures healed in both groups.

CONCLUSION

Low-profile double plating attains comparable healing rates as single plating and has a significantly lower risk for re-intervention as well as a shorter operation duration. The lower reintervention rate is mainly explained by a lower incidence of implant irritation in the double plating group.

摘要

背景

对于锁骨中段骨折的固定,低轮廓双钢板似乎是传统单钢板的一种可行替代方案。本研究旨在比较这两种技术在骨折愈合、并发症及取出率方面的差异。

方法

这项回顾性队列研究纳入了2020年至2022年期间在某创伤中心接受锁骨中段骨折钢板固定治疗的所有16岁以上患者。排除标准包括病理性骨折或开放性骨折、骨折不愈合以及事故发生14天以上的延迟就诊或治疗。患者被分为两个治疗组:单钢板组(Synthes 3.5mm锁定加压钢板上/前方或Synthes 2.7mm有限接触锁定加压钢板上)和低轮廓双钢板组(2.0mm上钢板联合2.4mm或2.7mm前方微型钢板)。比较两组在骨折愈合、并发症及取出率方面的差异。

结果

共纳入99例患者,单钢板组74例,双钢板组25例。两组在前三个月内的内固定失败率相当(双钢板组为4.0%,单钢板组为2.7%,p = 0.744,其中1例由感染引起)。低轮廓双钢板组的手术时间显著更短(95分钟对vs.\ 111分钟,p = 0.019)。单钢板组60例患者和双钢板组20例患者有长期随访数据。双钢板组再次干预的需求显著更低(n = 5,25.0%对vs.\ n = 31,51.7%,p = 0.038)。两组再次干预主要是由内固定刺激引起(双钢板组n = 4,20%对vs.\ 单钢板组n = 29,48.3%,p = 0.026)。两组所有骨折均愈合。

结论

低轮廓双钢板与单钢板的骨折愈合率相当,再次干预风险显著更低,手术时间更短。再次干预率较低主要是因为双钢板组内固定刺激的发生率较低。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f3d4/11759345/cd5b323f8088/pone.0318004.g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验