Suppr超能文献

使用眼前节光学相干断层扫描技术评估小梁切除术滤过泡内部反射率和形态对手术成功的鉴别能力。

Discriminatory power of trabeculectomy bleb internal reflectivity and morphology in surgical success using anterior segment optical coherence tomography.

作者信息

Tan Jeremy C K, Roney Matthew, Posarelli Matteo, Ansari Abdus Samad, Batterbury Mark, Vallabh Neeru A

机构信息

St Paul's Eye Unit, Royal Liverpool University Hospital, Liverpool, UK.

Faculty of Medicine and Health, University of New South Wales, Kensington, NSW, Australia.

出版信息

BMC Ophthalmol. 2025 Jan 30;25(1):52. doi: 10.1186/s12886-024-03770-6.

Abstract

BACKGROUND

The post-operative evaluation of trabeculectomy blebs has traditionally relied on subjective clinical grading systems performed at the slit-lamp. This study explores the use of swept source anterior-segment optical coherence tomography (AS-OCT) to objectively measure bleb internal reflectivity and morphology, and to distinguish blebs with surgical success vs. failure.

METHODS

Cross-sectional study of patients with glaucoma who had undergone trabeculectomy at least one year prior. Swept source AS-OCT was used to capture filtering blebs in the sagittal plane. Standardised regions of interests on the sagittal plane were segmented, and pixel intensity values and bleb height were measured. Receiver operating characteristic curves were used to examine the discriminatory ability of pixel intensity values and bleb morphology to classify blebs with surgical success or failure.

RESULTS

100 eyes of 65 patients were included, with a median post-operative follow up of 7.0 years (IQR 3.2-16 years). The proportion of complete success, qualified success and failure was 45%, 33%, and 22% respectively. The maximum bleb height was significantly greater in the blebs with complete success (1.74 vs. 1.25 vs. 1.23 mm in CS vs. QS vs. F, one-way ANOVA, p < 0.0001). Mean pixel intensity was significantly lower in blebs with complete success (150.8 vs. 157.4 vs. 167.4 in CS vs. QS vs. F, p = 0.0001). Bleb intensity standard deviation (AUC 0.81), maximal bleb height (AUC 0.76), mean pixel intensity (AUC 0.75) and minimum pixel intensity (AUC 0.75) offered the best discrimination between surgical success and failure.

CONCLUSIONS

Swept-source AS-OCT can be used to quantify bleb internal reflectivity and morphology, which can be used to distinguish between well vs. poorly functioning blebs. These parameters may assist surgeons in the objective evaluation of post-operative bleb outcomes.

摘要

背景

小梁切除术滤过泡的术后评估传统上依赖于在裂隙灯下进行的主观临床分级系统。本研究探讨使用扫频源眼前节光学相干断层扫描(AS-OCT)客观测量滤过泡内部反射率和形态,并区分手术成功与失败的滤过泡。

方法

对至少在一年前接受小梁切除术的青光眼患者进行横断面研究。使用扫频源AS-OCT在矢状面捕获滤过泡。对矢状面上的标准化感兴趣区域进行分割,并测量像素强度值和滤过泡高度。使用受试者工作特征曲线来检验像素强度值和滤过泡形态对手术成功或失败的滤过泡进行分类的鉴别能力。

结果

纳入65例患者的100只眼,术后中位随访时间为7.0年(四分位间距3.2 - 16年)。完全成功、合格成功和失败的比例分别为45%、33%和22%。完全成功的滤过泡的最大滤过泡高度显著更高(完全成功组为1.74 mm,合格成功组为1.25 mm,失败组为1.23 mm,单因素方差分析,p < 0.0001)。完全成功的滤过泡的平均像素强度显著更低(完全成功组为150.8,合格成功组为157.4,失败组为167.4,p = 0.0001)。滤过泡强度标准差(曲线下面积0.81)、最大滤过泡高度(曲线下面积0.76)、平均像素强度(曲线下面积0.75)和最小像素强度(曲线下面积0.75)在区分手术成功与失败方面具有最佳鉴别能力。

结论

扫频源AS-OCT可用于量化滤过泡内部反射率和形态,这可用于区分功能良好与功能不良的滤过泡。这些参数可能有助于外科医生客观评估术后滤过泡的结果。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f42a/11780981/4094d86b97e8/12886_2024_3770_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验