Di Martino Alberto, Rossomando Valentino, Bordini Barbara, Brunello Matteo, Ferri Riccardo, Faldini Cesare
Department of Orthopedic and Traumatology, IRCCS Istituto Ortopedico Rizzoli, Via Giulio Cesare Pupilli 1, Bologna, Italy.
Department of Biomedical and Neuromotor Science-DIBINEM, University of Bologna, Bologna, Italy.
J Orthop Traumatol. 2025 Feb 21;26(1):9. doi: 10.1186/s10195-025-00824-3.
Anatomic stems for total hip arthroplasty (THA) have been developed to achieve a precise geometric fit between the implant and the surrounding femoral bone, aiming at the improvement of primary stability of cementless implants until osteointegration occurs. The aim of the current study is to go over the regional Registry of Orthopaedic Prosthetic Implants (RIPO) to analyze survivorship of THA implants when anatomic stems are used; moreover, separate analysis for modular and nonmodular stems, and in standard and short implants, is presented.
This retrospective registry study involved the analysis of data collected by the RIPO registry between 2000 and 2019. The study focused on THAs performed for primary hip osteoarthritis (OA) between 2000 and 2019. All patients treated by THA within this time frame and officially registered in the RIPO registry were included in the study. Exclusion criteria were: revision THAs, cemented implants, hemiarthroplasties, resurfacing procedures, megaprostheses for neoplastic and non-neoplastic conditions, and THAs performed on patients residing outside the region.
A total of 12,010 cementless primary THAs using curved anatomic stems were performed in Emilia-Romagna between 2000 and 2019 and formally registered in the RIPO registry. The overall survival rate for anatomic standard stems was 96.7% at 10 years (96.1-97.3%); at 15 from the surgery, the survival rate dropped to 95.1% (93.9-96.1%). A total of 473 out of 12,010 recorded THA with anatomic stems (3.93%) experienced failure requiring revision surgery. The fixed standard stem showed the lowest failure rate (0.6%), while modular short stems had the highest (7.4%) at long-term follow-up. The most common stem-related complication was periprosthetic fracture (PF) in short stems (2.0% of cases) while in standard stems it was implant breakage (0.9% of cases); PFs were significantly more frequent in female patients (p = 0.0082), with a relative risk (RR) of 1.59 compared with male patients. Implant breakage demonstrated the highest rate of incidence among standard-modular stems (1.1% of cases).
This registry-based study highlights that stem length and modularity significantly affect the long-term survival of anatomic femoral stems in THA. Fixed standard stems had the lowest failure rates, while modular short stems showed the highest failure rates and complications.
全髋关节置换术(THA)的解剖型股骨柄已被开发出来,以实现植入物与周围股骨之间精确的几何匹配,旨在提高非骨水泥植入物在骨整合发生之前的初始稳定性。本研究的目的是查阅骨科假体植入物区域登记处(RIPO)的数据,分析使用解剖型股骨柄时THA植入物的生存率;此外,还对模块化和非模块化股骨柄以及标准型和短柄型植入物进行了单独分析。
这项回顾性登记研究涉及对RIPO登记处在2000年至2019年期间收集的数据进行分析。该研究聚焦于2000年至2019年期间因原发性髋骨关节炎(OA)而进行的THA手术。在此时间范围内接受THA治疗并正式登记在RIPO登记处的所有患者均纳入本研究。排除标准为:翻修THA、骨水泥型植入物、半髋关节置换术、表面置换手术、用于肿瘤和非肿瘤疾病的大假体以及对居住在该地区以外患者进行的THA手术。
2000年至2019年期间,在艾米利亚 - 罗马涅地区共进行了12,010例使用弧形解剖型股骨柄的非骨水泥初次THA手术,并正式登记在RIPO登记处。解剖型标准股骨柄在10年时的总体生存率为96.7%(96.1 - 97.3%);术后15年时,生存率降至95.1%(93.9 - 96.1%)。在12,010例记录的使用解剖型股骨柄的THA手术中,共有473例(3.93%)出现需要翻修手术的失败情况。在长期随访中,固定标准型股骨柄的失败率最低(0.6%),而模块化短柄型股骨柄的失败率最高(7.4%)。最常见的与股骨柄相关的并发症在短柄型中是假体周围骨折(PF,占病例的2.0%),而在标准型中是植入物断裂(占病例的0.9%);PF在女性患者中明显更常见(p = 0.0082),与男性患者相比,相对风险(RR)为1.59。植入物断裂在标准模块化股骨柄中的发生率最高(占病例的1.1%)。
这项基于登记处的研究强调,股骨柄长度和模块化显著影响THA中解剖型股骨干的长期生存率。固定标准型股骨柄的失败率最低,而模块化短柄型股骨柄的失败率和并发症最高。