Study on Demulsification via Vacuum Filtration with Superamphiphilic Diatomite/G-CN/Rice Husk Charcoal Composite Filter Layer.

The primary extraction way for unconventional oil/gas resources is hydraulic fracturing to alter the reservoir for commercial production. However, hydraulic fracturing technology consumes a large amount of water, and the flowback water can easily be mixed with hydrocarbon substances to form emulsions. To achieve the recycling of water, it is necessary to develop an efficient continuous demulsification method for treating the flowback fluid. In this study, a composite filtration layer with superhydrophilic and superoleophilic properties was successfully prepared using water-based polyurethane as a binder. The g-CN was used to improve the affinity of the filtration layer to water and oil. The diatomite and rice husk carbon were used as an adsorbent and a filter aid, respectively. The contact angles (CA) of both oil and water on the surface of the filtration layer were measured to be 0°. During the demulsification process, vacuum filtration was employed to increase the pressure difference across the filtration layer, thereby improving the treatment flux of flowback fluid. The experimental results showed that the filtration flux with the addition of rice husk charcoal increased from 160.58 L∙m∙h to 174.68 L∙m∙h compared to the filter layer without rice husk charcoal. Based on the composite filtration layer, the apparent demulsification efficiency exceeded 90.6% for various types of emulsion. The mechanism of demulsification was investigated by the molecular dynamics method. The results showed that the adsorption layer density of water molecules reached 1.5 g/cm, and the adsorption layer density of oil molecules exceeded 2.5 g/cm. The porous structure wall has a strong adsorption effect on both oil and water molecules, resulting in deformation and destruction of the oil-water interface, so that the dispersed phase is adsorbed and aggregated by the filter layer at the same time and permeates from the filter layer after reaching saturation, thus separating the two phases.