Morales Carolina F, Osorio Fernando A
Department of Food Science and Technology, Technological Faculty, University of Santiago, Chile (USACH), Av. El Belloto 3735, Estación Central, Santiago 9170022, Chile.
Polymers (Basel). 2025 Mar 4;17(5):682. doi: 10.3390/polym17050682.
Food waste has a significant social impact but can be revalued as a source of bioactive compounds, such as condensed tannins. This abundant biomass, corresponding to a polymeric antioxidant, must be depolymerized to become bioavailable. Previous studies have investigated polymer degradation into oligomers using high temperatures and expensive nucleophiles, often under conditions unsuitable for food applications. In the present investigation, it is proposed that the depolymerization of condensed tannins can occur under food-grade conditions using a Generally Recognized as Safe (GRAS) solvent by optimizing the reaction's heating method with microwave assistance and using gallic acid as a nucleophile. Thermal studies indicate that the degradation of total polyphenols content follows first-order kinetics and occurs above 80 °C in microwave. Depolymerization follows second-order kinetics, yielding epicatechin as the primary product with zero-order formation kinetics. The optimized factors were 80% / ethanol, 10 mg/mL polymeric tannins, and 5.88 mg/mL gallic acid. Under these conditions, the reaction efficiency was 99.9%, the mean particle diameter was 5.7 nm, the total polyphenols content was 297.3 ± 15.9 EAG mg/g, and the inhibition of ABTS●+ and DPPH● radicals was 93.5 ± 0.9% and 88.2 ± 1.5%, respectively. These results are promising for future scaling processes.
食物浪费具有重大的社会影响,但可作为生物活性化合物(如缩合单宁)的来源进行再利用。这种丰富的生物质对应一种聚合抗氧化剂,必须解聚才能具有生物可利用性。先前的研究使用高温和昂贵的亲核试剂研究了聚合物降解为低聚物的过程,且通常是在不适用于食品应用的条件下进行的。在本研究中,提出通过微波辅助优化反应的加热方法并使用没食子酸作为亲核试剂,缩合单宁的解聚可在食品级条件下发生。热学研究表明,总多酚含量的降解遵循一级动力学,在微波中80℃以上发生。解聚遵循二级动力学,以表儿茶素作为主要产物,其生成动力学为零级。优化的因素为80%/乙醇、10mg/mL聚合单宁和5.88mg/mL没食子酸。在这些条件下,反应效率为99.9%,平均粒径为5.7nm,总多酚含量为297.3±15.9EAGmg/g,对ABTS●+和DPPH●自由基的抑制率分别为93.5±0.9%和88.2±1.5%。这些结果对未来的放大工艺很有前景。