Wermeling D P, Rapp R P, DeLuca P P, Piecoro J J
Am J Hosp Pharm. 1985 Aug;42(8):1739-44.
Osmolalities of commonly administered small-volume i.v. admixtures were determined, and use of diluents with lower osmolality to achieve osmolality values less than 400 mOsm/kg was studied. The theoretical osmolality of 218 hypothetical admixtures of various concentrations of 34 injectable drugs in 50- or 100-mL quantities of 5% dextrose injection or 0.9% sodium chloride injection was calculated using sodium chloride equivalents. If the calculated osmolality value was greater than 400 mOsm/kg, an actual admixture was prepared and osmolality and density were measured. To determine how admixtures with osmolality values less than 400 mOsm/kg could be prepared, theoretical osmolality was calculated using 0.45% sodium chloride injection or sterile water for injection as the diluent. The calculated osmolality value was greater than 400 mOsm/kg for 52 (23.9%) of the 218 admixtures tested. Of the 52 measured osmolality values, 47 were within 15% of the calculated value. Calculated osmolality values for all admixtures were less than 400 mOsm/kg when 0.45% sodium chloride injection or sterile water for injection was used as the diluent. Admixture osmolality should be considered when preparing drugs for i.v. injection. For drugs with high osmolalities, 0.45% sodium chloride injection or sterile water for injection may be used as the diluent.
测定了常用小容量静脉注射混合液的渗透压,并研究了使用渗透压较低的稀释剂以达到低于400mOsm/kg渗透压值的情况。使用氯化钠当量计算了50或100mL的5%葡萄糖注射液或0.9%氯化钠注射液中34种注射用药物不同浓度的218种假设混合液的理论渗透压。如果计算出的渗透压值大于400mOsm/kg,则制备实际混合液并测量渗透压和密度。为了确定如何制备渗透压值低于400mOsm/kg的混合液,使用0.45%氯化钠注射液或注射用水作为稀释剂计算理论渗透压。在测试的218种混合液中,有52种(23.9%)计算出的渗透压值大于400mOsm/kg。在52个测量的渗透压值中,47个在计算值的15%以内。当使用0.45%氯化钠注射液或注射用水作为稀释剂时,所有混合液的计算渗透压值均低于400mOsm/kg。在制备静脉注射药物时应考虑混合液的渗透压。对于高渗透压的药物,可使用0.45%氯化钠注射液或注射用水作为稀释剂。