Chen Wei, Liu Bowen, Wu Qiuhong, Liu Jie, Ren Zhenhua, Wang Qinyong, Liu Zhaofeng, Peng Wenqing, Zhou Yu, Wang Yuanzeng, Peng Zhili
School of Smart Construction and Energy Engineering, Hunan Institute of Engineering, Xiangtan, 411104, China.
Innovation Institute of Advanced Functional Materials, Hunan Institute of Engineering, Xiangtan, 411104, China.
Sci Rep. 2025 May 20;15(1):17437. doi: 10.1038/s41598-025-01976-2.
Excavating water-saturated rock strata inevitably induces slippage and alters effective stress, significantly affecting the rock's strength and deformation capacity. Understanding the hydro-mechanical coupling characteristics of these strata is essential for the safe excavation of vertical shafts. This study employs triaxial compression tests on water-saturated sandstone using the MTS-815 rock mechanics test system to investigate these characteristics. Tests were conducted at confining pressures (σ) of 10, 20, and 30 MPa, with pore water pressures set at 0%, 20%, 40%, 60%, and 80% of the respective confining pressures. The effective stress coefficient (α) was analyzed concerning the rock's deformation and strength. A novel method for calculating the effective stress coefficient, based on the effective stress principle and the Mohr-Coulomb criterion, is proposed, leading to several key conclusions. The results indicate: (1) A positive linear correlation exists between the peak strength attenuation coefficient of sandstone specimens and the effective stress coefficient, with a correlation coefficient of 0.82. (2) The effective stress coefficient α is a bilinear function of pore water pressure p and volumetric stress Θ, with a fitting analysis correlation coefficient of 0.986. Furthermore, α is positively linearly correlated with p and negatively linearly correlated with Θ. (3) Under hydro-mechanical coupling, rock porosity is positively exponentially correlated with the effective stress coefficient. At constant confining pressure, the effective stress coefficient is positively linearly correlated with Poisson's ratio and negatively linearly correlated with the elastic modulus. This criterion addresses the limitations of pore elasticity theory in determining the effective stress coefficient for the peak strength of rocks and significantly enhances the prediction of the mechanical properties of aquifer rocks.
挖掘饱水岩层不可避免地会引发滑移并改变有效应力,显著影响岩石的强度和变形能力。了解这些岩层的流固耦合特性对于竖井的安全挖掘至关重要。本研究利用MTS - 815岩石力学试验系统对饱水砂岩进行三轴压缩试验,以研究这些特性。试验在围压(σ)为10、20和30MPa下进行,孔隙水压力设定为各自围压的0%、20%、40%、60%和80%。针对岩石的变形和强度分析了有效应力系数(α)。提出了一种基于有效应力原理和莫尔 - 库仑准则计算有效应力系数的新方法,得出了几个关键结论。结果表明:(1)砂岩试件的峰值强度衰减系数与有效应力系数呈正线性相关,相关系数为0.82。(2)有效应力系数α是孔隙水压力p和体积应力Θ的双线性函数,拟合分析相关系数为0.986。此外,α与p呈正线性相关,与Θ呈负线性相关。(3)在流固耦合作用下,岩石孔隙率与有效应力系数呈正指数相关。在恒定围压下,有效应力系数与泊松比呈正线性相关,与弹性模量呈负线性相关。该准则解决了孔隙弹性理论在确定岩石峰值强度有效应力系数方面的局限性,显著提高了对含水层岩石力学性质的预测。