Suppr超能文献

用于稳定丙烷脱氢催化剂的沸石中的铂迁移锁定

Pt migration-lockup in zeolite for stable propane dehydrogenation catalyst.

作者信息

Xu Zhikang, Gao Mingbin, Wei Yao, Yue Yuanyuan, Bai Zhengshuai, Yuan Pei, Fornasiero Paolo, Basset Jean-Marie, Mei Bingbao, Liu Zhongmin, Zhu Haibo, Ye Mao, Bao Xiaojun

机构信息

State Key Laboratory of Fluorine & Nitrogen Chemicals, College of Chemical Engineering, Fuzhou University, Fuzhou, China.

Qingyuan Innovation Laboratory, Quanzhou, China.

出版信息

Nature. 2025 Jul;643(8072):691-698. doi: 10.1038/s41586-025-09168-8. Epub 2025 May 28.

Abstract

The shale gas revolution has shifted propylene production from naphtha cracking to on-purpose production with propane dehydrogenation (PDH) as the dominant technology. Because PDH is endothermic and requires high temperatures that favour sintering and coking, the challenge is to develop active and stable catalysts that are sufficiently stable. Zeolite-supported Pt-Sn catalysts have been developed to balance activity, selectivity and stability and more recent work documented a PDH catalyst based on zeolite-anchored single rhodium atoms with exceptional performance and stability. Here we show for silicalite-1 (S-1) that migration of encapsulated Pt-Sn clusters and hence agglomeration and anchoring within the zeolite versus agglomeration on the external surface can be controlled by adjusting the length of the S-1 crystals' b-axis. We find that, when this axis is longer than 2.00 μm, migration of Pt-Sn monomers during PDH results in intracrystalline formation of (Pt-Sn) dimers that are securely locked in the channels of S-1 and capable of converting pure propane feed to propylene at 550 °C for more than 6 months with 98.3% selectivity at 91% equilibrium conversion. This performance exceeds that of other Pt-based PDH catalysts and approaches that of the Rh-based catalyst. Although synthesis requirements and cost are at present prohibitive for industrial use, we anticipate that our approach to controlling the migration and lockup of metals in zeolites may enable the development of other noble-metal catalysts that offer extended service lifetimes in industrial applications.

摘要

页岩气革命已使丙烯生产从石脑油裂解转向以丙烷脱氢(PDH)为主要技术的定向生产。由于PDH是吸热反应且需要高温,这有利于烧结和结焦,因此面临的挑战是开发出足够稳定的活性和稳定性俱佳的催化剂。已开发出沸石负载的Pt-Sn催化剂来平衡活性、选择性和稳定性,并且最近的研究记录了一种基于沸石锚定单铑原子的PDH催化剂,其具有卓越的性能和稳定性。在此,我们表明对于硅沸石-1(S-1),通过调整S-1晶体b轴的长度,可以控制封装的Pt-Sn簇的迁移,进而控制其在沸石内的团聚和锚定与在外表面的团聚情况。我们发现,当该轴长于2.00μm时,PDH过程中Pt-Sn单体的迁移会导致在S-1通道内形成(Pt-Sn)二聚体,这些二聚体牢固地锁定在S-1通道中,能够在550℃下将纯丙烷原料转化为丙烯,在91%平衡转化率下选择性达到98.3%,且持续6个月以上。这种性能超过了其他基于Pt的PDH催化剂,接近基于Rh的催化剂。尽管目前合成要求和成本对于工业应用来说过高,但我们预计,我们控制沸石中金属迁移和锁定的方法可能会促使开发出其他在工业应用中具有更长使用寿命的贵金属催化剂。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验