Akhbarizadeh Razegheh, Xu Yan Jin, Boerner Freya, Helm Paul A, Diamond Miriam L
Department of Earth Sciences, University of Toronto, Toronto, Ontario M5S 3B1, Canada.
Environmental Monitoring and Reporting Branch, Ontario Ministry of the Environment, Conservation and Parks, Toronto, Ontario M9P 3V6, Canada.
ACS ES T Water. 2025 May 22;5(6):3111-3117. doi: 10.1021/acsestwater.5c00017. eCollection 2025 Jun 13.
Efficient and replicable extraction of microplastics (MPs) and other anthropogenic particles from complex environmental matrices remains challenging. We tested and optimized the extraction of water samples with and without organic matter (OM) spiked with 9 MP polymers with 16 different morphologies and/or colors, that were pristine (63-1000 μm) and aged (300-1000 μm). Statistical analyses showed that OM presence most significantly influenced MP (300-1000 μm) recoveries, followed by the strength of digestion reagents, temperature, and exposure time. Optimal recovery of MPs in a matrix with OM of <2 g/L can be obtained with a single-step digestion of Fenton's reagent. A sequential combination of two or more digestion solutions (e.g., Fenton's reagent +10% potassium hydroxide) is recommended when OM >10 g/L. Recoveries of aged MPs susceptible to degradation were up to 6 times lower than those of their pristine version after applying the same digestion method. Thus, while the digestion method may be nondestructive for pristine MPs, weathered MPs could be partially or completely digested. We recommend that the characteristics of the spiked MPs closely match those of the targeted particles in real samples during quality control tests, which allows for the generation of robust and reliable monitoring data sets.
从复杂环境基质中高效且可重复地提取微塑料(MPs)及其他人为颗粒仍然具有挑战性。我们测试并优化了对添加了9种具有16种不同形态和/或颜色的MP聚合物的水样的提取方法,这些聚合物有原始状态(63 - 1000μm)和老化状态(300 - 1000μm)两种。统计分析表明,有机物质(OM)的存在对MP(300 - 1000μm)回收率的影响最为显著,其次是消化试剂的强度、温度和暴露时间。对于OM含量<2 g/L的基质,采用一步法芬顿试剂消化可实现MP的最佳回收率。当OM>10 g/L时,建议采用两种或更多消化溶液的顺序组合(如芬顿试剂 + 10%氢氧化钾)。在采用相同消化方法后,易降解的老化MP的回收率比其原始状态低达6倍。因此,虽然消化方法对原始MP可能是无损的,但老化的MP可能会被部分或完全消化。我们建议在质量控制测试期间,添加的MP的特性应与实际样品中目标颗粒的特性紧密匹配,这样才能生成强大且可靠的监测数据集。