Biyouki Azadeh Amrollahi, Izadi Nosrat, Bovard Samaneh, Tahernezhad Yasaman, Nassar Nashaat, Ghafar-Zadeh Ebrahim
School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box: 11155/4563, Tehran, Iran.
Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), P.O. Box: 14665-1998, Tehran, Iran.
Sci Rep. 2025 Jul 15;15(1):25605. doi: 10.1038/s41598-025-09448-3.
Reservoir wettability alteration is a vital method for enhancing oil recovery, especially at the pore scale, where it plays a key role in optimizing extraction and minimizing risks from chemical and water flooding. Among different mechanisms, surface charge stands out as a promising and practical approach. This study examines the effects of seven smart water compositions (SW0SO4, SW2SO4, SW4SO4, SW2Mg, SW2Ca, SW25d, SW50d), two heptol ratios, and varied asphaltene concentrations on oil recovery in carbonate rocks (calcite and dolomite). Surface charge and interfacial tension were assessed at both oil/brine and rock/brine interfaces using zeta potential, interfacial tension, and elasticity measurements. The results show that oil/water zeta potential varied with asphaltene content (0.2%, 4%, 9%), heptol ratio (1:5, 1:40), and brine composition, even under constant pH and ionic strength. Lower heptol ratio led to increased negative surface charge on asphaltenes, and higher asphaltene content increased interfacial tension in different brines. Low-salinity and sulphate-rich brines enhanced interfacial elasticity, increasing oil droplet coalescence time and reducing adhesive forces, which improved oil mobility. The study also revealed distinct differences in surface charge between dolomite and calcite in the same brine. Imbibition tests show that oil recovery correlates with surface charge alteration mechanisms during smart water injection. A higher total zeta potential is associated with enhanced oil recovery, emphasizing the important role of surface charge in influencing oil production. Notably, the total zeta potential values align with oil recovery, suggesting that stronger static repulsion between oil droplets and the rock surface significantly improves oil production. These results highlight the relevance of surface charge in EOR processes and support the development of charge-based recovery models.
储层润湿性改变是提高采收率的重要方法,尤其是在孔隙尺度上,它在优化开采以及将化学驱油和水驱油的风险降至最低方面发挥着关键作用。在不同的机理中,表面电荷是一种很有前景且实用的方法。本研究考察了七种智能水配方(SW0SO4、SW2SO4、SW4SO4、SW2Mg、SW2Ca、SW25d、SW50d)、两种庚醇比例以及不同沥青质浓度对碳酸盐岩(方解石和白云石)采收率的影响。使用zeta电位、界面张力和弹性测量方法,在油/盐水和岩石/盐水界面处评估了表面电荷和界面张力。结果表明,即使在恒定的pH值和离子强度下,油/水zeta电位也会随沥青质含量(0.2%、4%、9%)、庚醇比例(1:5、1:40)和盐水成分而变化。较低的庚醇比例会导致沥青质表面负电荷增加,较高的沥青质含量会增加不同盐水中的界面张力。低盐度和富含硫酸盐的盐水增强了界面弹性,增加了油滴聚并时间并降低了粘附力,从而改善了油的流动性。该研究还揭示了在相同盐水中白云石和方解石表面电荷的明显差异。自吸试验表明,智能水注入过程中的采收率与表面电荷改变机制相关。较高的总zeta电位与采收率提高相关,强调了表面电荷在影响石油生产中的重要作用。值得注意的是,总zeta电位值与采收率一致,表明油滴与岩石表面之间更强的静电排斥力显著提高了石油产量。这些结果突出了表面电荷在提高采收率过程中的相关性,并支持基于电荷的采收模型的开发。