Mahreen Lohani, C Ashwathi, Warrier Anish Kumar
Department of Sciences, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Udupi, Karnataka, 576104, India.
Centre for Climate Studies, Department of Civil Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Udupi, Karnataka, 576104, India.
Environ Monit Assess. 2025 Aug 28;197(9):1053. doi: 10.1007/s10661-025-14513-5.
Microplastic (MP) contamination in terrestrial ecosystems-particularly in agricultural soils-remains an underexplored environmental concern in India, an agriculture-driven economy. This study assessed MP contamination in paddy fields across 15 sites in Udupi (Karnataka) and Goa, with soil samples collected from the surface and at three subsurface depths (10, 20, and 30 cm). MPs were extracted using density separation, identified via stereomicroscopy and ATR-FTIR, and further characterized using SEM-EDS to examine surface morphology and elemental composition. Microplastics were detected in all samples, with higher concentrations observed in Goa across most depths. In Goa, surface soils contained an average of 100.93 ± 64.19 pieces/kg, while subsurface layers at 10, 20, and 30 cm recorded 90.70 ± 40.37, 119.76 ± 169.44, and 48.34 ± 29.75 pieces/kg, respectively. In comparison, Udupi samples exhibited slightly lower concentrations, with 95.68 ± 30.69 pieces/kg at the surface, and 55.00 ± 29.33, 46.53 ± 9.04, and 16.10 ± 7.63 pieces/kg at corresponding depths. Shape analysis revealed regional differences: in Udupi, fibres dominated (86.8%), followed by films (10.3%) and fragments (3.0%), whereas in Goa, fibres were less dominant (50.8%), with a higher proportion of films (36.7%) and fragments (12.0%). Black-coloured MPs and polypropylene polymers were most prevalent overall. SEM analysis indicated signs of environmental weathering, and EDS confirmed the presence of toxic heavy metals (Fe, Cd, and As) on MP surfaces. The highest Polymer Hazard Index (PHI) value of 1859.9 was recorded in Goa, indicating Hazard Level V due to the presence of high-risk polymers such as polyamide and polystyrene. The Coefficient of Microplastic Impact (CMPI) analysis showed that fibre-shaped MPs in Udupi had values > 0.8, indicating strong ecological risk, while Goa exhibited a more balanced morphology impact (CMPI: 0.11-0.50). These findings underscore the widespread presence of MPs in agricultural soils and highlight the urgent need for routine monitoring and the development of mitigation strategies to protect soil health and food security.
在以农业为主导的经济体印度,陆地生态系统中的微塑料(MP)污染,尤其是农业土壤中的微塑料污染,仍是一个未得到充分研究的环境问题。本研究评估了卡纳塔克邦乌度皮和果阿15个地点稻田中的微塑料污染情况,从表层以及三个地下深度(10厘米、20厘米和30厘米)采集了土壤样本。通过密度分离法提取微塑料,利用体视显微镜和衰减全反射傅里叶变换红外光谱仪(ATR-FTIR)进行识别,并使用扫描电子显微镜-能谱仪(SEM-EDS)进一步表征以检查表面形态和元素组成。在所有样本中均检测到了微塑料,在果阿的大多数深度观察到更高的浓度。在果阿,表层土壤平均含有100.93±64.19个/千克,而在10厘米、20厘米和30厘米的地下层分别记录为90.70±40.37个/千克、119.76±169.44个/千克和48.34±29.75个/千克。相比之下,乌度皮的样本浓度略低,表层为95.68±30.69个/千克,在相应深度分别为55.00±29.33个/千克、46.53±9.04个/千克和16.10±7.63个/千克。形状分析显示出区域差异:在乌度皮,纤维占主导(86.8%),其次是薄膜(10.3%)和碎片(3.0%),而在果阿,纤维的主导性较低(50.8%),薄膜(36.7%)和碎片(12.0%)的比例更高。总体而言,黑色微塑料和聚丙烯聚合物最为普遍。扫描电子显微镜分析表明存在环境风化迹象,能谱仪证实微塑料表面存在有毒重金属(铁、镉和砷)。果阿记录的最高聚合物危害指数(PHI)值为1859.9,由于存在聚酰胺和聚苯乙烯等高风险聚合物,表明处于危害等级V。微塑料影响系数(CMPI)分析表明,乌度皮的纤维状微塑料值>0.8,表明生态风险高,而果阿的形态影响更为平衡(CMPI:0.11 - 0.50)。这些发现强调了微塑料在农业土壤中的广泛存在,并突出了对土壤健康和粮食安全进行常规监测以及制定缓解策略的迫切需求。