Trigila Carlotta, Kratochwil N, Mehadji B, Ariño-Estrada G, Roncali E
Department of Biomedical Engineering, University of California at Davis, Davis, CA 95616 USA.
Department of Radiology, University of California at Davis, Davis, CA 95616 USA.
IEEE Trans Radiat Plasma Med Sci. 2024 Sep;8(7):734-742. doi: 10.1109/trpms.2024.3395131. Epub 2024 Apr 29.
High-performance radiation detectors often employ crystal arrays where light can leak between them, a phenomenon called intercrystal crosstalk, which demands mitigation for optimal detector performance. The complexity of measuring optical crosstalk in conventional detector geometries makes optical Monte Carlo simulation essential to study and reduce crosstalk through better designs. Addressing the absence of validated transmission models in Monte Carlo toolkits, we developed and integrated a new simulation model into the look-up table Davis Model, aiming at simulating optical photon refraction at the crystal interfaces using GATE. For the first time, we validated the intercrystal optical crosstalk model with experiments in two optically coupled Lutetium-yttrium oxyorthosilicate crystals read by two SiPMs, testing three thicknesses and four interfaces (air, glue, Teflon, and ESR). Simulated and experimental crosstalk agreed within one FWHM for all configurations. These results show the possibility of predicting optical photon transmission in detector designs with multiple crystal elements. Indeed, although validated using only two crystals, the model can be used in more complex geometries. The model, available to GATE users upon request, provides a valuable resource for researchers when optimizing detector geometry where optical crosstalk needs to be considered, i.e., ensuring optical isolation between the photodetector's responses.
高性能辐射探测器通常采用晶体阵列,光可能会在晶体之间泄漏,这种现象称为晶体间串扰,为实现最佳探测器性能,需要减轻这种串扰。在传统探测器几何结构中测量光学串扰的复杂性使得光学蒙特卡罗模拟对于通过更好的设计来研究和减少串扰至关重要。针对蒙特卡罗工具包中缺乏经过验证的传输模型的情况,我们开发了一种新的模拟模型并将其集成到查找表戴维斯模型中,旨在使用GATE模拟晶体界面处的光学光子折射。我们首次在由两个硅光电倍增管读取的两个光学耦合的正硅酸镥钇晶体中通过实验验证了晶体间光学串扰模型,测试了三种厚度和四个界面(空气、胶水、聚四氟乙烯和电子自旋共振)。对于所有配置,模拟和实验串扰在一个半高宽范围内一致。这些结果表明在具有多个晶体元件的探测器设计中预测光学光子传输的可能性。实际上,尽管仅使用两个晶体进行了验证,但该模型可用于更复杂的几何结构。该模型可应GATE用户要求提供,为研究人员在优化需要考虑光学串扰的探测器几何结构时提供了宝贵资源,即确保光电探测器响应之间的光学隔离。