Asif Sana Ullah, Shakoor Abdul, Asghar Bushra, Waheed Abdul, Alanazi Abdullah K, Mazhar Muhammad Ehsan, Atiq Shahid, Haroon Muhammad Yahya, Qayyum Abdul, Abbas Waseem, Bano Zainab, Ahmad Farooq
Department of Physics, Qilu Institute of Technology Jinan 250200 Shandong P. R. China
Centre of Excellence in Solid State Physics, University of the Punjab Lahore 54590 Pakistan
RSC Adv. 2025 Sep 12;15(40):33374-33389. doi: 10.1039/d5ra05161d. eCollection 2025 Sep 11.
Energy crises have prompted researchers to develop new electrode materials for efficient energy storage, leading to the creation of effective energy storage devices. Therefore, this study introduces Ni-doped ZnSe/rGO-based materials fabricated through a hydrothermal synthesis method, which demonstrated enhanced electrical and electrochemical performance. X-ray diffraction (XRD) analysis revealed an increase in the crystallite size from 49.72 nm to 96.74 nm, accompanied by a corresponding growth in the particle size, which can be attributed to the incorporation of Ni and rGO as substituents. The electrochemical characterization of all fabricated electrodes indicated that the best-performing ZnNiSe/rGO composite achieved a high specific capacitance of 1920.20 F g at 5 mV s, significantly surpassing that of pure ZnSe (346.8 F g), as determined from CV measurements. Additionally, the ZnNiSe/rGO electrode demonstrated excellent cycling stability (90.85% capacitance retention after 10 000 cycles), a high power density of 3500 W kg at a current density of 7 A g, and an energy density of 83.81 Wh kg at a current density of 1 A g, with a storage capability of 1058.75 F g. The combined effect of Ni and rGO doping in the composites resulted in a notable reduction in series and charge transfer resistances. Under optimal conditions, it exhibited excellent electrochemical performance, as indicated by good ionic conductivity (0.037 S cm), the highest transference number for cations (0.90), and a rate constant of 1.42 × 10 cm s at an exchange current density of 0.00137 A g, as well as a diffusion coefficient of 8.03 × 10 m s, suggesting enhanced ion transport characteristics. These promising attributes of ZnNiSe/rGO strongly demonstrate it as an ideal electrode material for advanced energy storage applications.
能源危机促使研究人员开发用于高效储能的新型电极材料,从而催生了高效的储能装置。因此,本研究介绍了通过水热合成法制备的镍掺杂硒化锌/还原氧化石墨烯基材料,该材料展现出增强的电学和电化学性能。X射线衍射(XRD)分析表明,微晶尺寸从49.72纳米增加到96.74纳米,同时粒径相应增大,这可归因于镍和还原氧化石墨烯作为取代基的掺入。所有制备电极的电化学表征表明,性能最佳的ZnNiSe/rGO复合材料在5 mV s时实现了1920.20 F g的高比电容,显著超过纯硒化锌(346.8 F g),这是通过循环伏安法测量确定的。此外,ZnNiSe/rGO电极表现出优异的循环稳定性(10000次循环后电容保持率为90.85%),在电流密度为7 A g时具有3500 W kg的高功率密度,在电流密度为1 A g时具有83.81 Wh kg的能量密度,储能能力为1058.75 F g。复合材料中镍和还原氧化石墨烯掺杂的综合作用导致串联电阻和电荷转移电阻显著降低。在最佳条件下,它表现出优异的电化学性能,如良好的离子电导率(0.037 S cm)、阳离子的最高迁移数(0.90)以及在交换电流密度为0.00137 A g时1.42×10 cm s的速率常数,还有8.03×10 m s的扩散系数,表明离子传输特性得到增强。ZnNiSe/rGO的这些优异特性有力地证明它是用于先进储能应用的理想电极材料。