Suppr超能文献

通过对枯草芽孢杆菌细胞中央纵向薄切片中隔膜生长区的计算机重建来研究极体组装。

Study of pole assembly in Bacillus subtilis by computer reconstruction of septal growth zones seen in central, longitudinal thin sections of cells.

作者信息

Burdett I D, Higgins M L

出版信息

J Bacteriol. 1978 Feb;133(2):959-71. doi: 10.1128/jb.133.2.959-971.1978.

Abstract

The septal growth of Bacillus subtilis 168/s has been studied by making a number of observations from thin sections of cells from exponentially growing cultures. The process was initiated by the formation of a new cross wall under a preexisting layer of cylindrical wall. An annular notch appeared to cut through the overlying wall and presumably allowed the cross wall to split into two layers of peripheral wall. During this initial notching process, two raised bands of wall material were produced which resembled those previously observed in morphological studies of Streptococcus faecalis. Through an improved fixation technique, it was possible to preserve the bands seen in B. subtilis to the extent that they were used as markers to study the subsequent stages of septal growth. These stages included (i) the continued displacement of the two bands from the cross wall (as the two nascent polar surfaces enlarged and as the diameter of the cross wall decreased), (ii) the closure of the cross wall, and (iii) the final severance of the common cross wall connection between two completed poles. To study this process in a more quantitative manner, three-dimensional reconstructions of the envelope observed between pairs of the raised bands were made from axial thin sections of cells. The process of reconstruction was based on a technique by which x, y coordinates were taken from thin sections and were rotated around the cell's central axis. These reconstructions were used to estimate the surface area or volume of the reconstructed zones or their parts. A round of septal growth was then simulated by arranging 118 reconstructions in order of increasing surface area or volume. The topology of the process was studied by noting how various measurements of septal thickness, length, surface area, and volume varied as a function of increasing septal zone size. This analysis was based on several assumptions, of which three of the most important are: (i) the bands produced by the initial notching process are markers which separate septal from cylindrical wall growth; (ii) a septal zone observed between pairs of bands is made up of two nascent poles and a single cross wall; and (iii) as septal zones develop in terms of relative age they increase in size (volume or surface area) or amount of wall. The data suggested that the S. faecalis model of surface growth (in which polar growth occurs through a regulated constrictive separation and expansion of a cross wall) also seems applicable to the pattern of septal growth observed here for B. subtilis. This was indicated from measurements which showed that increases in the size of nascent polar surfaces were correlated with decreases in cross wall diameter. An explanation of these observations may be that decreases in cross wall diameter were due to a progressive splitting of the cross wall that removed surface from the outer circumference of the cross wall and converted it into new polar surface. Calculations further suggested that if the poles of B. subtilis were made by this model a sizeable and variable increase in surface area of the cross wall would also be required to convert these separating cross wall layers into two curved polar structures. Measurements of wall thickness taken from various locations within septal zones indicated that while the thickness of the polar wall of B. subtilis was constant over its surface, the width of the cross wall varied considerably during a round of synthesis. Again, one of the simplest explanations compatible with these observations and those previously made in S. faecalis is that the B. subtilis cross wall is brought to a constant thickness (possibly by remodeling or precursor addition) before or during separation. Although most observations made from the reconstruction of the septal zones of B. subtilis may fit the S. faecalis model of surface growth, differences in the pattern of septal growth were seen when the two organisms were compared. These have been discussed in terms of differences in the regulation of their respective septal growth sites and basic mechanisms of wall assembly and modification.

摘要

通过对指数生长期培养物中的细胞进行超薄切片观察,对枯草芽孢杆菌168/s的隔膜生长进行了研究。该过程始于在已有圆柱壁层下方形成新的横壁。一个环形切口似乎切入覆盖的壁层,并可能使横壁分裂成两层外周壁。在这个初始切口过程中,产生了两条壁物质隆起带,类似于先前在粪肠球菌形态学研究中观察到的那些。通过改进的固定技术,有可能保存枯草芽孢杆菌中看到的这些带,以至于它们被用作标记来研究隔膜生长的后续阶段。这些阶段包括:(i)两条带从横壁持续移位(随着两个新生极表面扩大以及横壁直径减小),(ii)横壁闭合,以及(iii)两个完整极之间的共同横壁连接最终切断。为了更定量地研究这个过程,从细胞的轴向超薄切片对隆起带之间观察到的包膜进行了三维重建。重建过程基于一种技术,通过该技术从超薄切片获取x、y坐标并围绕细胞的中心轴旋转。这些重建用于估计重建区域或其部分的表面积或体积。然后通过按表面积或体积增加的顺序排列118个重建来模拟一轮隔膜生长。通过注意隔膜厚度、长度、表面积和体积的各种测量值如何随隔膜区域大小增加而变化来研究该过程的拓扑结构。该分析基于几个假设,其中最重要的三个假设是:(i)初始切口过程产生的带是将隔膜生长与圆柱壁生长分开的标记;(ii)在带对之间观察到的隔膜区域由两个新生极和一个单一横壁组成;(iii)随着隔膜区域按相对年龄发展,它们的大小(体积或表面积)或壁的量增加。数据表明,粪肠球菌表面生长模型(其中极生长通过横壁的调节性收缩分离和扩展发生)似乎也适用于此处观察到的枯草芽孢杆菌的隔膜生长模式。这从测量结果中得到表明,测量结果显示新生极表面大小的增加与横壁直径的减小相关。对这些观察结果的一种解释可能是,横壁直径的减小是由于横壁的逐渐分裂,从横壁的外周去除表面并将其转化为新的极表面。计算进一步表明,如果枯草芽孢杆菌的极由该模型形成,还需要横壁表面积有相当大且可变的增加,才能将这些分离的横壁层转化为两个弯曲的极结构。从隔膜区域内不同位置获取的壁厚测量表明,虽然枯草芽孢杆菌极壁的厚度在其表面上是恒定的,但在一轮合成过程中横壁的宽度变化很大。同样,与这些观察结果以及先前在粪肠球菌中进行的观察结果相符的最简单解释之一是,枯草芽孢杆菌横壁在分离之前或期间被带到恒定厚度(可能通过重塑或添加前体)。尽管从枯草芽孢杆菌隔膜区域重建中进行的大多数观察可能符合粪肠球菌表面生长模型,但比较这两种生物体时,在隔膜生长模式上仍存在差异。这些差异已根据它们各自隔膜生长位点的调节差异以及壁组装和修饰的基本机制进行了讨论。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/0b87/222109/ceb1a327a122/jbacter00297-0531-a.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验