Suppr超能文献

用于撤机的T形管改良装置中呼气末气体分布及重复呼吸情况

Distribution of expiratory gas and rebreathing in T-piece modifications used in weaning.

作者信息

Hartmann-Andersen F, Andersen P K, Olsen J E, Jakubaszko J

出版信息

Acta Anaesthesiol Scand. 1983 Dec;27(6):501-4. doi: 10.1111/j.1399-6576.1983.tb01995.x.

Abstract

The simple T-piece is frequently used as a weaning system during respirator treatment. It is modified with an expiratory non-compliant reservoir (EnCR), an inspiratory compliant reservoir (ICR) and/or an expiratory one-way valve. The distribution of expiratory gases and rebreathing were studied in a model set-up in the corresponding systems at different fresh gas flows (FGF) and tidal volumes (VT). An EnCR produces no change, whereas an ICR causes the expiratory gas to flow into the inspiratory limb, an effect which is intensified by the presence of an expiratory valve. With a falling FGF and a rising VT, increasing amounts of expiratory gas are found in the inspiratory limb in the modifications with an ICR. However, this gives rise to rebreathing in the valve modification with a low FGF and high VT. The modification of the T-piece with an ICR but without a one-way valve is advantageous, as this system combines only slight dilution via the expiratory limb and a minimal risk of rebreathing.

摘要

简易T形管常被用作呼吸机治疗期间的撤机系统。它通过呼气非顺应性贮气囊(EnCR)、吸气顺应性贮气囊(ICR)和/或呼气单向阀进行改良。在不同新鲜气流(FGF)和潮气量(VT)条件下,对相应系统模型设置中的呼出气分布和重复呼吸情况进行了研究。EnCR无变化,而ICR会使呼出气流入吸气支路,呼气阀的存在会增强这种效应。随着FGF下降和VT上升,在带有ICR的改良装置中,吸气支路中会发现越来越多的呼出气。然而,在低FGF和高VT的阀门改良装置中,这会导致重复呼吸。不带单向阀的ICR改良T形管是有利的,因为该系统仅通过呼气支路产生轻微稀释,且重复呼吸风险最小。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验