Suppr超能文献

髋臼截骨术(索尔特氏)的X线立体摄影测量研究

A roentgen stereophotogrammetric investigation of innominate osteotomy (Salter).

作者信息

Hansson L I, Olsson T H, Selvik G, Sundén G

出版信息

Acta Orthop Scand. 1978 Feb;49(1):68-72. doi: 10.3109/17453677809005727.

Abstract

The effect of the innominate osteotomy according to Salter was investigated by a roentgen stereophotogrammetric method in a 17-year-old girl with hip dysplasia as a part of the tricho-rhino-phalangeal (Giedion) syndrome. The osteotomy resulted in a total rotation of 32 degrees about an axis passing cranially to the pubic symphysis and the osteotomy. The acetabulum rotated 22 degrees forwards about a transverse axis, 9 degrees laterally about a longitudinal axis and 24 degrees laterally about a sagittal axis. The acetabulum was translated 2 mm laterally along a transverse axis, 21 mm caudally along a longitudinal axis and 19 mm dorsally along a sagittal axis. The position of the screw axis indicates that some motion also took place in one or both of the sacroiliac joints. The correction as measured with the CE-angle was 25 degrees which was almost the same as the correction about the sagittal axis. It is, however, noted that the CE-angle was also dependent upon the rotations about the transverse and longitudinal axes.

摘要

采用X线立体摄影测量法,对一名患有毛发-鼻-指(吉迪恩)综合征且髋关节发育不良的17岁女孩进行了根据索尔特法进行的无名骨截骨术效果研究。截骨术导致整体围绕一条穿过耻骨联合上方和截骨处的轴线旋转了32度。髋臼围绕横轴向前旋转22度,围绕纵轴向外旋转9度,围绕矢状轴向外旋转24度。髋臼沿横轴向外平移2毫米,沿纵轴向尾侧平移21毫米,沿矢状轴向背侧平移19毫米。螺钉轴的位置表明骶髂关节一处或两处也发生了一些移动。用CE角测量的矫正角度为25度,这与矢状轴方向的矫正角度几乎相同。然而,需要注意的是,CE角也取决于围绕横轴和纵轴的旋转。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验