Robbins P A, Swanson G D, Howson M G
J Appl Physiol Respir Environ Exerc Physiol. 1982 May;52(5):1353-7. doi: 10.1152/jappl.1982.52.5.1353.
A computerized prediction-correction scheme has been devised for the control of alveolar gases. First, a model is run off-line to predict the inspiratory gas tensions at each second that should yield the desired alveolar patterns. Second, during the experiment, there is feedback correction based on the deviation of the actual alveolar values from the desired alveolar values. The actual alveolar values are found by a second computer and passed to the controlling computer using interrupts. The controlling computer has four digital-toi-analog outputs for controlling CO2, O2, N2, and air flows so as to achieve the commanded inspiratory PCO2 and PO2 (CO2 and O2 partial pressures, respectively). The scheme is illustrated for the generation of sinusoidal alveolar PCO2 with alveolar PO2 held constant and for steps of alveolar PCO2 at constant alveolar PO2.
已设计出一种用于控制肺泡气体的计算机化预测-校正方案。首先,离线运行一个模型,以预测每秒的吸气气体张力,这些张力应产生所需的肺泡模式。其次,在实验过程中,根据实际肺泡值与所需肺泡值的偏差进行反馈校正。实际肺泡值由第二台计算机获取,并通过中断传递给控制计算机。控制计算机有四个数模输出,用于控制二氧化碳、氧气、氮气和空气流量,以实现指令的吸气二氧化碳分压和氧分压(分别为二氧化碳和氧气的分压)。该方案通过在肺泡氧分压保持恒定的情况下生成正弦波肺泡二氧化碳分压以及在恒定肺泡氧分压下进行肺泡二氧化碳分压的阶跃变化进行说明。