Suppr超能文献

铸造修复体预备体的固位与抗力

Retention and resistance of preparations for cast restorations.

作者信息

Potts R G, Shillingburg H T, Duncanson M G

出版信息

J Prosthet Dent. 1980 Mar;43(3):303-8. doi: 10.1016/0022-3913(80)90406-0.

Abstract

Five preparation designs were tested for retention and resistance. Retention values for all partial veneer crowns were significantly lower than those for the complete veneer crown. Resistance values increased significantly with the addition of grooves and/or extension of axial surface coverage. Addition of grooves and/or extension of axial surface coverage produced small increases in retention values but marked increases in resistance values.

摘要

对五种预备设计进行了固位和抗力测试。所有部分贴面冠的固位值均显著低于全贴面冠。随着增加沟和/或扩大轴面覆盖范围,抗力值显著增加。增加沟和/或扩大轴面覆盖范围使固位值略有增加,但抗力值显著增加。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验